Horizontal LS Type Of Shaftless Screw Conveyor Working Smoothly
I. Overview.
Shaftless screw conveyor is a kind of screw conveyor. The shaftless
screw conveyor drives the spiral body to rotate through the
rotation of the motor to push the material to the place where it
needs to be unloaded. During the whole process, the material does
not follow the spiral blade to rotate, but is pushed forward by the
moving blade in the rotation. The shaftless screw conveyor can be
equipped with multiple inlets and outlets.
II.Characteristics are below
1. The structure is simple, the failure rate is reduced, and it is
convenient for installation, disassembly and later maintenance.
2. Small size, small footprint and space, convenient for use in
scenes with space limitations.
3. Flexible transportation, multiple loading and unloading points
can be set up according to requirements.
4. The operation and conveying process are safe and reliable.
III. Applictaion
Shaftless screw conveyors can convey materials that traditional
shaft screw conveyors and belt conveyors cannot or are difficult to
convey, such as granular and powdery materials, wet and pasty
materials, semi-fluid and viscous materials, easy to wind and easy
to block Materials, mainly used in chemical industry, papermaking,
environmental protection and other industries to transport
materials with strong adhesion, paste-like viscous materials (such
as chemical raw materials, waste paper pulp, malt, sludge, etc.)
and easily entangled materials (such as domestic garbage)
IV. Technical parameter
| Model | Screw Diameter(mm) | Speed(r/min) | Capacity(m3/h) |
| WLS150 | 148 | 60 | 5 |
| WLS200 | 180 | 50 | 10 |
| WLS250 | 233 | 45 | 15 |
| WLS300 | 278 | 40 | 25 |
| WLS400 | 365 | 30 | 40 |
| WLS500 | 470 | 25 | 65 |
Ⅴ.Selection Conditions of Trough Auger Conveyor
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |
VI. FAQ:
1. What’s the information should I provide when inquiry?
More details or drawings, more better.
A: which materials that conveying
B: handing caoacity
C: lift height
D: conveying length ?
Or other specials you give us will be more appreciated.
2. How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons.
B: remote control with push buttons
3. How long is your warranty?
Our warranty is 15 months after received the goods.
