Equipment Chip Auger Conveyor , Flexible Screw Auger Sealed
Transportation
Application
U Trough Screw Conveyor is widely used in building materials,
metallurgy, chemical industry, machinery, light industry, grain and
food industry. U Trough Screw Conveyor is suitable for conveying
powder Shaped, granular, small bulk materials, such as cement, fly
ash, grain, chemical fertilizer, mineral powder, sand, soda and so
on. U Trough Screw Conveyor is not suitable for transporting
materials that are easy to deteriorate, sticky and easy to caking.
The working environment temperature of the conveyor is usually-20
°40 °, the temperature of the conveying material is generally 20
°80 °℃, the U Trough Screw Conveyor is suitable for horizontal and
small inclination arrangement, and the inclination angle is not
more than 15 degrees. If the tilt angle is too large, the tubular
screw conveyor should be selected.
Advantages and Features
1. Large handling capacity, safe and reliable, low produce cost.
2. Strong adaptability, convenient installation and maintenance,
long service life
3. Small volume, high rotate speed in order to ensure rapid and
uniform transport.
4.The conveying length is up to 70m,Working temperature is -20~50℃,
with material temperature below 200℃.
Technical parameter
| Model | Diameter mm | Pitch mm | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) |
| φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 |
| LS250 | 250 | 250 | 90 | 29.7 | 21.8 | 9.9 | 71 | 23.5 | 17.2 | 7.8 | 56 | 18.5 | 13.6 | 6.2 |
| LS315 | 315 | 315 | 80 | 52.9 | 38.8 | 17.6 | 63 | 41.6 | 30.5 | 13.9 | 50 | 33.1 | 24.2 | 11 |
| LS400 | 400 | 355 | 71 | 85.3 | 62.5 | 28.4 | 56 | 67.3 | 49.3 | 22.4 | 45 | 54.1 | 39.6 | 18 |
Selection Conditions
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |
