Wifi Camera Lock Door Access Control System Face Recognition
Technology Turnstile Device
*AI Dynamic Face Recognition Infrared Thermal Imaging Thermometer /
Face Recognition Body Temperature Detection Integrated / In & Out
Intelligent Solution Non-Touch
*Fast In and out
*Abnormal alert
*Face recognition
*Access control
*Infrared thermal imaging fast temperature measurement error as low
as + -0.3 degrees
*Binocular biopsy
*Abnormal temperature control
*Real-time voice broadcast
*Speed of recognition <300MS
*Recording speed <500MS
*Distance: 0.3-0.5m for 7inch; 0.3-08 for 8inch.
*Record information in real time
*7/8 Inch IPS HD IP34
| Dimension | 8 inches |
| Full view | 170°IPS LCD screen |
| Resolution | 800*1280 |
| Type | RGB Infrared |
| Resolution | 2 million pixels & 1.3 million pixels |
| Aperture | F2.8 |
| Focal Length | 3.2mm |
| White Balance | Automatically |
| Wide Dynamic | Support |
| CPU 6 cores | 2.0GHz |
| Storage | RAM 2GB,ROM8GB |
| Fill Light | Infrared, LED fill light |
| Network Module | Support wired, wireless (2.4GWiFi), wireless (USB external) |
| USB | USB2.0 1 |
| RS232 | RS232, 2.5mm terminal block 2P |
| Relay | 2.5mm terminal block 3P |
| Weigand | 2.5mm terminal block 3P, support Wiegand 26 |
| Wired | Network RJ45 Gigabit Network |
Precautions:
- The temperature measuring device should be used in a room with a
room
temperature between 10 ℃ -40 ℃. Do not install the temperature
measuring
device under the vent, and ensure that there is no heating source
within 3
meters;
- Personnel entering the room from a cold outdoor environment will
affect the
temperature measurement accuracy. The forehead temperature test
should be
performed after the forehead is unobstructed for three minutes and
the
temperature is stable;
- The temperature read by the temperature measuring device is the
temperature in the forehead area. When there is water, sweat, oil
or thick
makeup on the forehead or the elderly have more wrinkles, the read
temperature will be lower than the actual temperature. Make sure
there is no
hair or clothing covering this area.
MJK ELECTRONICS CO., LTD
was established in 2005. Our company is located in shenzhen, China.
Our company is a professional Hi-Tech enterprise engaged in all
kinds of LCD digital signage displays such as outdoor
kiosks,interactive touch kiosks, touch screen table ,wall mounted
displays, floor standing displays,, LCD monitor ,videowall, etc.
which are the most widely using media in retail, shopping center,
restaurant, hotel, bank, building, airport, showroom etc.
We have a professional and precise technical support team,
including software development engineer, electronic engineer,
construction engineer, who are outstanding in the digital signage.
As one of the leading company in digital signage, MJK offers very
innovative, stylish, and full-function products, which are welcome
by the clients from over fifty countries and areas.
MJK always takes the strict QMS system to control quality for Zero
Fault, so as to meet various standards from clients worldwide. Our
products acquire CE, FCC, ROHS,3C certifications so far.
Having rich experience in OEM & ODM cooperation, we are capable of
offering you factory price with guaranteed quality as well as
complete after-sale service. We have and will always try our best
to meet every possible demand of our customers.
