Industrial PoE Media Converter 15.4W/30W Power 100/1000M Gigabit Ethernet SFP Unmanaged

Specification of Rugged Fiber Ethernet Converter

Fiber Options

On the fiber side there are 2 main options for you

SFP Optical Port

• It extends a network cable connection 500-meter or 2KM on Multimode optic cable
• On singlemode fiber, it is flexible to extend 10Km/20KM/40KM/60KM distance

1*9 Fixed Fiber Module

• You could choose FC/ST/SC fiber transceiver for difference distances.

• The standard packing usually contains a main device, a warranty card and a user manual.
• Packing box dimension for 1pc: 25.3*20.8*8cm
• Packing: 20pcs in a packing box of 67*33*47cm dimension

Application of PoE media converter

QC Profile

ISO9001 Quality System
We got necessary certificates to support our products.
Full-Spectrum environment and electrical testing of all product design

1. Welding: Weld the necessary components
2. 2. Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
3. 3. Assembling: Builds up components of a product, like panels, screws, PCB boards.
4. 4. Testing: To make sure the product is basically working fine after assembling
5. 5. Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
6. 6 Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
7. 7. QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
8. When all above is done, the product will go to market.