Fine Copper Wire Drawing Machine With Annealing Machine And Air Conditioning , Welded By Steel Plate

HXE-22DT Copper fine wire drawing machine with annealing machine And Air Conditioning

I. Application

HXE-22DT Copper fine wire drawing machine with annealing machine,

It's used to draw and anneal single bare copper wire from 1.6mm to 0.2mm-0.6mm.

II. Main Technical parameters

1. Usage single bare copper wire drawing and annealing, Inlet size 1.6mm, Outlet size 0.2mm-0.6mm

2. Machine speed/max 1500m/min, Die number 22, Dies size 25mm×8-10mmT, Slip ratio 15.5%+10%

Wire drawing mode standing-mode and 4axes, Drive by Inverter control, Brand Inovance, Most widely used brand in drawing machine.

3. Main motor 15KW, Spooler motor 3.7KW, China best brand. Annealing voltage DC60V/max, Annealing current DC500A/max, Annealing power 30KVA, Annealing method DC Three section annealing.

4. Annealing protection will be done by steam protection, Capacity of compressed air 0.4-0.6Mpa, 20L/min

Demand Water quantity for annealing and coolant 200L/min, Machine frame welded by steel plate, Transmission Flat belts

5. Capstan Ceramic plasma, Lubricating system Pipe Spray, Bobbin size 300mm, loading capacity: 50kg/max. Bobbin loading & unloading type shaft type, Traversing unit 110W synchros motor, width: 270mm/max.

6. Tension control by Air pressure tension control (With Weight balance as Backup) , Cabinet 0.8m*0.6m*2.0m, Machine dimension 2.3m*1.6m*1.9m; Installation Area 3.3m*1.7m+0.8*0.6m, Machine weight 3400KG, Cabinet weight 500KG. In total for shipping around 4,000KG.

III. Components

IV. Tension control

4-1. By air pressure, auto revising the spooler tension automatically.

4-2. Regulating the tension according to the different sizes of outlet diameter.

4-3. Each machine will have one weight balance device as back up.

V. Traversing unit

5-1. 110W synchros motor, stable and react fast.

5-2. The bearing is slippery, high rigidly and fray slowly.

VI. Bobbin loading and unloading

6-1. Single shaft type. With trolley and slope board to load and unload the bobbin.

6-2. Safe cover is able to shut up, with acrylic window to observe the spooler and traversing.

6-3. With one wrench to load and unload the bobbin.

VII. Motor

7-1. Main motor 15kw, with Inverter control

7-2. Spooler motor 3.7kw, with Inverter control

VIII. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

(4). DC. three-section annealing

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

IX. Lifting the machine, installation, adjustment

9-1. Lifting, there are four lifting rings to lift.

9-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.

9-3. Adjustment, clean all parts, check all the part no loose.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.