HXE-24DW Fine copper wire drawing machine
I. Quick description
24DW Fine copper wire drawing machine is used to drawing copper
wire from 0.6mm-1.2mm to 0.08mm-0.5mm.
II. Components
| Name | Quantity |
| 1. Pay-off shelf | 1 set |
| 2. HXE-24DW Fine copper wire drawing machine | 1 set |
| 3. Bobbin Unloading device | 1 set |
| 4. Spare parts | As per List |
| 5. Operation manual | |
III. Specifications
1. Inlet wire diameter: 0.6mm-1.2mm
2. Outlet wire diameter: 0.08mm-0.5mm
3. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h; 0.3mm, 37kg/h; 0.4mm,
46kg/h; 0.5mm, 52kg/h.
4. Dies number: 24
5. Slip ratio (Area reduction) : 13%+ 8%
6. Wire drawing mode: horizontal-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese
famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor: 3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan: Ceramic plasma
12. Max capstan diameter: 242mm
13. Max fix speed capstan: 207mm
14. Machine structure: Cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: Flat belts
17. Pay-off method: Over-head
18. Tension control: Weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type
22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake
24. Power source: Customize
25. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight:
2500KG
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take
responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the
machine.
C. Due to Buyer`s wrong operation that may cause damage to the
machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.
V. Body structure and function
1. body structure of machine
The body of machine is ironed cast with HT-250.clearing the
internal stress through annealing treatment and fine boring
machine.
2. Drive shaft: The material is 45# steel. The shaft axes is
processed by HRC25-27,clear the internal stress.
3. Power transmission.According to the correspond speed of each
primary drum rotate speed ,the power is transferred by high
friction rate flat in between each of the shaft.The spooler shaft
has its own motor and inverter,the spooler speed is adjusted by
feed back from the tension lever cushion device to the inverter.
4. Transversing device.
Using 100W low speed synchro motor, stabilization, guarantee
excellent appearance.
Adjust method of the breadth: Use the adjust bolt to control the
position of the limit switch,maximum breadth is 370mm
5. Bobbin loading &unloading:
The cone is locked by left-hand thread bolt to fast the iron shaft,
the moveable block and oblique board under the spooler are provided
for installing and uninstalling reduce the worker's job.( Which can
be designed according to the dimension provide by the user). The
fully sealed cover has transparent screen and low voltage light
tube to monitor the reeling condition. A 55# spanner is provided
for installing and uninstalling the shaft.
6. Brake protecting:
The Taiwan famous brand solenoid brake will automatic apply braking
when the line is broken or the inverter tripped.
The bobbin is full of wires,the machine will lower the speed in 60
seconds,Braking automatically to prevent the wire breaking.
7. Foot switch
When wire pointing, to control the machine runs in a low
speed(about 100meters/minute), It is also can be use as an
emergency stop if any thing wrong when the machine draws wire.
