50Khz Ultrasonic Wide Area Nozzle Spraying for Glass Coating with
Titanium Materials
Description:
The ultrasonic atomization spraying system uses the piezoelectric
effect to convert electrical energy into high-frequency mechanical
energy, and uses high-frequency oscillation to atomize the liquid
into uniform micrometer sized particles. Compared with traditional
pressure type nozzles, ultrasonic spraying can obtain a more
uniform, thinner, and controllable thin film coating, which is not
easy to block the nozzle.
Due to the fact that ultrasonic nozzles only require a small amount
of air at the kilopascal level, there is almost no splashing during
the spraying process, resulting in a coating utilization rate of
over 95%. This technology is widely used in the field of precision
coating preparation. The ultrasonic atomization nozzle body is made
of titanium material, which has outstanding acoustic
characteristics, high tensile strength, and excellent corrosion
resistance.
Principle:
The ultrasonic atomizer utilizes electronic high-frequency
oscillation and the high-frequency resonance of ceramic atomization
plates to disperse the structure of liquid water molecules and
produce naturally flowing water mist, without the need for heating
or adding any chemical reagents. Compared with the heating
atomization method, it saves 90% of energy. In addition, a large
amount of negative ions will be released during the atomization
process, which will react with floating smoke, dust, etc. in the
air in an electrostatic manner, causing them to precipitate. At the
same time, it can effectively remove harmful substances such as
formaldehyde, carbon monoxide, bacteria, etc., purifying the air
and reducing the occurrence of diseases.
Parameters:
| Model | FSW-5006-L |
| Name | Wide area ultrasonic nozzle |
| Frequency | 50Khz |
| Atomized particle size range(μm) | 15-40 |
| Spray width(mm) | 50-100 |
| Spray flow(ml/min) | 1-25 |
| Spray height(mm) | 50-300 |
| Liquid viscosity (cps) | <30 |
| Particle size (μm) | <10 |
| Diversion pressure (Mpa) | <0.1 |
| Application | Suitable for ultra large area spraying, such as glass coating, etc |
Application:
Ultrasonic equipment is mainly used in industries such as fuel
cells, thin-film photovoltaic cells, thin-film solar coatings,
perovskite solar cells, solar cells, graphene coatings, silicon
photovoltaic cells, glass coatings, biomedicine, food processing,
textiles and non-woven fabrics, microelectronics and
semiconductors. The nozzle can be used for various liquids, even
sewage, chemical liquids, and low viscosity oil and viscous liquids
can be atomized and sprayed.
50Khz Ultrasonic Wide Area Nozzle Spraying for Glass Coating with
Titanium Materials
