Cookware Handle Pull Resistance Test Apparatus For Evaluate Pull
Resistance Capacity BS EN 12983-1
Product Information For Cookware Handle Pull Resistance Test
Apparatus:
It is used for testing resistance to pull on cookware handles. When
the handle is subjected to horizontal pull, the degree of
deformation cannot affect the function of the handle. After the
test, the fasteners are not loosened. It is used to evaluate the
pull resistance capacity of the cookware handle.
The cookware handle pull resistance test apparatus is a specialized
equipment used to evaluate the strength and durability of handles
on cookware items, such as pots, pans, and kitchen utensils. This
apparatus is designed to simulate the forces and conditions that a
handle may experience during typical kitchen use, ensuring that it
can withstand repeated pulling and lifting without failure.
Here are some key features and components typically found in a
cookware handle pull resistance test apparatus:
Frame or Fixture: The apparatus includes a sturdy frame or fixture
that holds the cookware securely during the testing process. The
cookware is typically clamped or fixed in place to simulate a
realistic usage scenario.
Gripping Mechanism: The apparatus incorporates a gripping mechanism
that simulates the hand or grip of a user. This mechanism is
designed to firmly grasp the cookware handle, applying controlled
pulling forces during the test.
Adjustable Settings: The apparatus allows for adjustable settings
to accommodate different handle sizes and shapes. It may feature
adjustable gripping mechanisms or interchangeable grips to
accommodate various cookware handle designs.
Pulling Speed Control: Some apparatus may offer the ability to
control the pulling speed during the test. This allows for testing
under different loading rates and simulates a range of usage
conditions.
The cookware handle pull resistance test apparatus is essential for
manufacturers and quality control departments to ensure that the
handles on cookware products meet safety and performance standards.
By subjecting the handles to controlled pulling forces, the
apparatus helps manufacturers assess their durability, identify
potential design or material weaknesses, and make improvements to
ensure consumer satisfaction and safety.
Applied standard For Cookware Handle Pull Resistance Test
Apparatus:
The design of the handle torque resistance test apparatus of
cookware complies with BS EN 12983-1:2020 clause 7.11 and Appendix
M.
Technical Parameters For Cookware Handle Pull Resistance Test
Apparatus:
1. The mass of steel impact hammer: 1kg±50g
2. The mass of metal guide and stop: 10kg±50g
3. The drop height: 150±5mm
4. The handle axis of the cookware can be adjusted to be 0°±1 °from
horizontal by adjusting the mounting brackets
5. Dimensions: length * width * height: 700mm*500mm*900m
6. Install the cookware, adjust its handle to be horizontal, clamp
the handle, apply the weight of the guide and the stop to the soft
rope, raise the impact weight to the upper limit (150mm), and
release it to the stop. Complete the pull test.
| The mass of steel impact hammer | 1kg±50g |
| The mass of metal guide and stop | 10kg±50g |
| The drop height | 150±5mm |
| Dimensions | Length * width * height: 700mm*500mm*900m |
| Power supply | Match client's local power grid |
