Description:
Our Epoxy resin can be cured under normal temperature, two
components system hard resin, natural defoaming, yellow resistance,
high transparency, bright in surface, it can be also cured at high
temperature for faster curing.
Features:
1.Can cure at room temperature or heating curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.Cured without ripples, no bubbles
5.Good transparency and excellent surface gloss
6.After dry it is with high hardness as stones
7.With high gloss like mirror
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Notice:
1,The operating environment should be ventilative and should keep
away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water
and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it
with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
FAQ:
Q1. Will the Table Epoxy Resin turn yellow over time?
A: No, because we add HALS, which is UV protection, it won't change
yellow.
Q2. Does this Table Epoxy Resin tend to scratch over time?
A: Our product is Scratch Resistance, Heat Resistance, Electrical
resistance.
Q3. What is the ideal temperature to make mixtures?
A: The optimal temperature is 25 degrees celsius, because our
laboratory temperature is 25 degrees celsius, but a little hotter
or colder is also ok.
Q4. How long can last if it is not mixed?
A: The shelf life is about 12 months, if you keep it well.
Q5. What payment terms do you accept?
A: Payment for TT, LC at sight. If you have good Credit or we
cooperate long time, the OA, DP, CAD also workable.
Q6. Could you accept OEM for Table Epoxy Resin?
A: Yes, we can do the packing according to your demand, the packing
bag and the label all can do your brand.
Q7: What tool or other material do I need for Table Epoxy Resin?
A: You need a weighing machine and a container to hole the resin.
If do river table or Art Crafts you may need some pigments and
accessories.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Company Display:
