Atk09.BC11.0010 12V DC 11W Red Multivalve Solenoid Valve Coil
Solenoid coils play a key role in automotive systems, and can be
roughly divided into two types according to the way energy
conversion is performed:
1. Directly using electromagnetic energy as the power, this is
limited to a limited range of automatic door locks for convenience
and safety, and fixed gears for automatic transmissions.
2. The method of driving hydraulic pressure and pneumatic control
valve by electromagnetic coil has been widely used in various
electro-hydraulic systems for the purpose of improving the basic
performances such as driving, steering, braking and comfort of
automobiles, among them, electromagnetic coils. Press the hydraulic
or pneumatic pressure according to the instructions of this
computer to drive the electro-hydraulic control valve or electronic
pneumatic control valve.
Dimension of BB09524812 Solenoid Valve Coil :
Technical Data:
Model | |
Hole Size | |
Height | |
Width | |
Connector | |
Insulation Class | |
Protection Class | |
Normal Voltage | |
Power | |
Application | Petrol Valve, LPG CNG Selonoid Valve, Multivalve |
Solenoid Coil Production Line:
Attention:
1. This air suspension compressor pump solenoid coil is made of
high quality components.
2. Replaces the original air compressor solenoid coil of your car
and equal the original quality.
3. Please double confirm the compatibility as well as the OEM
number before purchasing.
4. Instruction is not included. Professional installation is
recommended.
Steps and methods for properly installing a solenoid valve coil:
1. Check if the solenoid valve and the selected parameters are the
same, such as differential pressure, etc. If the error occurs, the
solenoid valve coil will be burned out. Voltage fluctuations should
be within the normal range and meet the rated voltage.
2. Before connecting the pipeline, flush the pipeline and remove
the residual dirt in the pipeline. If there are residual stains, it
will affect the normal use of the solenoid valve. To prevent this,
a filter should be installed in the pipeline.
3. Install the solenoid valve coil of the solenoid valve vertically
on the horizontal and ground pipes. If there is a special
situation, it cannot be installed vertically. The appropriate
solenoid valve should be ordered in advance, otherwise the solenoid
valve will not work properly.
4. When installing, add a safety process and install a manual
cutting valve to facilitate maintenance in case of failure.
5. Pay attention to the direction when installing, can not be
reversed, installed in the direction indicated on the package, and
can be reversed in some special cases such as vacuum.
6. If the water may be damaged by the medium, you must take
appropriate protective measures or choose a solenoid valve with a
waterproof hammer function.
7. The solenoid valve cannot be energized all the time, otherwise
it will reduce its life. Note that normally open, normally closed
solenoid valves cannot be used with care.
Product Features:
1. Using high quality wire which has UL approved; 2. Using high
quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
