EVI 7/8 AMP 6.3 x 0.8 AMISCO Type Solenoid Coil 8mm Hole Size
DC24V/AC220V
EVI 7/8 AMP 6.3 x 0.8 AMISCO Type Solenoid Coil designed for
pneumatic applications and is available for tubes with 8 mm
diameter.The EVI 7/8 solenoid coil are available with different
voltages and connections. There are some features about EVI 7/8
AMISCO type solenoid coil as follows:
EVI 7/8 solenoid coil features:
• Heat resistant spools made of 30% glass filled thermoplastic
polyester.
• Class H wire in accordance with IEC 60317-13 200 ° C.
• Built-in yoke made of low carbon iron.
• Made of high quality specially designed glass filled nylon
package.
• The copper and plastic materials used have passed UL
certification.
Technical parameter of EVI 7/8 AMISCO type solenoid coil:
| Model number | BB08029058 |
| Reference number | EVI7/8 AMP 6.3 x 0.8 |
| Normal voltage | DC24V/AC220V (Other color can be customized) |
| Normal power | DC: 3W 5.5W 6W AC: 6.5VA |
| Insulation class | H, F |
| Connection type | DIN43650B; 6.3mm x 0.8mm |
| Application | Pneumatic Valve Automatic Control; Household Appliances |
| Weight | 51.5 g |
| Hole size | 8 mm |
| Height | 29 mm |
Main dimension of EVI 7/8 8 Hole Size Electric magnetic coils:
Applicaiton of DC24V/AC220V pneumatic solenoid valve coils:
Large amount standard stock of EVI 7/8 AMP 6.3 x 0.8 DIN43650B
electromagnetic coils:
Overhaul of EVI 7/8 AMP 6.3 x 0.8 AMISCO Type Solenoid Coil:
Any use of the product will cause certain faults, which is of
course no exception for electromagnetic coils. It is believed that
people should not feel strange to electromagnetic coils. This kind
of product is quite used in industrial production. The use of
electromagnetic coils will bring great convenience to people, but
if there is a fault, it will have a very bad impact on people, and
people who pay attention to the maintenance of electromagnetic
coils should pay attention.
1. It is necessary to test the voltage of the electromagnetic coil.
When the attracting coil of the AC contactor has a voltage of 90%
of the rated voltage of the electromagnetic coil, such an
electromagnetic coil can work normally without worrying too much.
2. When using the electromagnetic coil, it is necessary to check
whether there is overheating. If it is overheated, it will appear
aging or discoloration. If this happens and it may be due to short
circuit noise, it needs to be replaced at this time. To prevent
accidents.
3. For the lead wire and the wiper wire of the electromagnetic
coil, it is also necessary to check whether there is open welding
or disconnection. If there is an abnormality, it must be repaired
in time.
It is very important to correct the electromagnetic coil, which can
reduce the occurrence of faults and avoid injury.
Why should the solenoid valve be installed horizontally? Can it be
installed vertically?
The solenoid valve is installed at a normal valve body level, and
the coil is vertically upward. Some products can be installed
arbitrarily, but it is preferably vertical when conditions permit,
to increase the service life.
Solenoid valves are mostly used for the opening and closing of
fluid environments, so they are directional and cannot be reversed.
In general design, the solenoid valve should be installed
horizontally, which is mainly considered from the service life. In
a pneumatic environment, such a design also has the effect of
reducing the blocking of impurities; in a liquid environment,
because of the relatively large current, the solenoid valve
installed vertically or obliquely is not only susceptible to
impurities but also affects its normal operation, and the blocking
of impurities ( Attached) plus the gravity of the ferromagnet
itself is a factor that easily affects the use of the solenoid
valve.
In hydraulic systems, because of the large current, in order to
extend the life of the solenoid valve, it is usually necessary to
install a relay.
Welcome to your inquiry!
