8 inch biometric face recognition Face Temperature Measuring 3d
Face Recognition Camera
Since the outbreak of the virus in 2020, body temperature detection
has become a necessary means to identify and prevent viral
infections. Handheld infrared thermometers make it a short distance
between humans, slow speeds, no records to check, and require a
large number of staff to specifically measure temperature. There
are many defects.
The traditional infrared temperature measuring gun requires a
person to operate at close range. Using the face recognition
temperature measurement access control device can save manpower,
reduce contact, and avoid cross infection. It can replace
fingerprint attendance and reduce fingerprint infection. When
employees complete temperature measurement, the records will be
upload;
The second screening and recording is particularly important. At
present, the second stage of infection is in progress, and the
relevant personnel records are more important
Precautions
- The temperature measuring device should be used in a room with a
room temperature between 10 °C-40 °C. Do not install the
temperature measuring device under the vent, and ensure that there
is no heating source within 3 meters;
- Personnel entering the room from a cold outdoor environment will
affect the temperature measurement accuracy. The forehead
temperature test should be performed after the forehead is
unobstructed for three minutes and the temperature is stable;
- The temperature read by the temperature measuring device is the
temperature in the forehead area. When there is water, sweat, oil
or thick makeup on the forehead or the elderly have more wrinkles,
the read temperature will be lower than the actual temperature.
Make sure there is no hair or clothing covering this area.
Application:
Applicable to office areas, gates, hotels, office buildings,
schools, etc. where face recognition gates are required.
Characteristics:
Support external HDMI large screen;
Support external ID card / IC card reader;
Support serial port input and output, support Wiegand output,
output content supports configuration;
Supports optional card swipe module (the white area below is the
swipe area), also Facial plus Card module can be achieved;
Dynamic face detection and tracking recognition algorithm based on
video stream;
Supports storage of 50,000 facial photos and 1 million
identification records;
1:N recognition accuracy is high; (97% pass rate, the accuracy rate
is 99.7%);
Face matching can be achieved with the optional swipe module;
The recognition speed is fast, the face tracking and detection
takes about 20ms, the face feature extraction takes about 300ms,
and the face comparison takes about 0.1ms.;
Support stranger detection, stranger level configurable;
Support for live photo preservation when face recognition or
stranger detection;
Support interface docking;
Support customization;
Support screen display content configuration;
Support recognition distance configuration;
|
|
Model No. | MJK-1081D |
| Pixels | 200W |
Type | Binocular wide dynamic camera |
Focus distance | 50-150cm |
White balance | Auto |
| Size | 8.0 inch |
Resolution | 800×1280 |
| CPU | Rk3288 four cores/ rk3399 six cores/ msm8953 eight cores |
Local storage | EMMC 8G |
Accessory | Fill light | LED and infrared double fill light |
| Network module | Support Ethernet, wireless (WiFi) |
Audio | Support 2.5W/4R horn |
USB | 1*USB OTG,1*USB HOST Standard A port |
Serial | 1*RS232 |
Relay output | 1 |
Wiegand interface | 1*26/34 output,1*26/34 input |
Upgrade button | Sport Uboot upgrade button |
LAN | 1*RJ45 |
| Face detection | Support multiple people detection and tracking |
Face database capacity | 30 thousands |
1:N Face recognition | Support |
1:1 face-matching | Support |
Stranger detection | Support |
Detection distance configuration | Support |
UI interface configuration | Support |
Remote upgrade | Support |
Device interface | Interface includes equipment management, personnel / photo
management, record query, etc |
Deployment mode | Support public cloud deployment, private deployment, LAN use,
stand-alone use |
Infrared thermal imaging module | Human body temperature detection | |
Detection distance | 1 meter |
Measuring Accuracy | |
Measuring range | |
Thermal imaging field of view | |
Visitors with normal temperature will be passed directly | |
Over temperature alarm | |
MJK ELECTRONICS CO., LTD
was established in 2005. Our company is located in shenzhen, China.
Our company is a professional Hi-Tech enterprise engaged in all
kinds of LCD digital signage displays such as outdoor
kiosks,interactive touch kiosks, touch screen table ,wall mounted
displays, floor standing displays,, LCD monitor ,videowall, etc.
which are the most widely using media in retail, shopping center,
restaurant, hotel, bank, building, airport, showroom etc.
We have a professional and precise technical support team,
including software development engineer, electronic engineer,
construction engineer, who are outstanding in the digital signage.
As one of the leading company in digital signage, MJK offers very
innovative, stylish, and full-function products, which are welcome
by the clients from over fifty countries and areas.
MJK always takes the strict QMS system to control quality for Zero
Fault, so as to meet various standards from clients worldwide. Our
products acquire CE, FCC, ROHS,3C certifications so far.
Having rich experience in OEM & ODM cooperation, we are capable of
offering you factory price with guaranteed quality as well as
complete after-sale service. We have and will always try our best
to meet every possible demand of our customers.
