Stain-Resistantl Nano Protective Lacquer For Concrete Stones
Ceramic Tiles
Product Introduction
The main structure of WL-0163 is “Inorganic Siloxane-based
alcohol-soluble Resin.” The main chemical bonds of WL-0163
are[-O-Si-O-]bonds which has the strongest chemical bonding
comparing with other carbon-containing chemical bonds in organic
resins such as[-C-O-]bond, [-C-C-]bond, and[-C-H-]bond, so
WL-0163can produce excellent features of chemical resistance,
solvent resistance, heat resistance(~600〫C), high hardness(2-8H),
abrasion resistance, and excellent weathering resistance which can
protect the floor to get rid of the damage from the ultraviolet
rays.
Because the particle size of the resin itself is only 50um which
makes WL-0163 has the feature of great penetration to get into the
substrate and create “Chemical Cross-linking Bond” to react with
the substrate of concrete, stones, ceramic tiles, and woods to form
the structure of “Nano-Film” with high adhesion on the surface of
the substrate. The “Nano-Film” can make the concrete own the
effects of being long-acting waterproof, stain-resistant,
damp-proof, mildew-proof, anti-chemical, and non-yellowing.
Application
- The sealer for the concrete treated by the densifier
- The protective treatment for the architectural concrete, the
concrete, and the pebble wash.
- The protective treatment for the water pressure resistance toward
the ditches between the ceramic tiles in the kitchens and the
bathrooms.
- The treating agent for the efflorescence on the walls and the leak
preventer for the voids in the concrete.
- The protective curing agent for natural stones, stone artifacts,
and the gems
- The special brightening agent for the ceramic tiles outdoor
- The protective curing agent used to maintain the historic monuments
and temples.
Feature
WL-0163 has excellent self-cleaning and stain-resistant effects.
This is because the structure of the coating film is made by
nanotechnology, which makes WL-0163 have long-lasting “Lotus
effect” to extend the service life of concrete, stones, ceramic
tiles, and woods. Not to say to reduce the cost of the maintenance.
The comparison between WL-0168and normal organic coating agent:
| Item | WL-0163 | Organic coatings |
| Heat Resistance | non-yellowing till 600〫C | yellowing above 200〫C |
| Aging and UV Resistance | Great | Bad |
| Pencil Hardness | 2H-8H, depending on baking temperature | 3H at most |
| Marresistance | Great | Normal |
| Oil and Solvent Repellence | Great | Bad |
| Stain Resistance | Great | Bad |
| Corrosion Resistance | Great | Good |
| Coating Stableness | Over 10 years | Cracked after 3-5 years |
| Chemicals Resistance | Great | Limited |
Packaging and Storage
packing:25kg/barrel
It should be placed in a cool and ventilated place with a shelf
life of 1 year.
