Bevel Edge Cup Head Insulation Weld Pins With Retaining Washer
Details of Bevel Edge Cup Head Insulation Weld Pins
This type of Capacitor Discharge (CD) pin is welded through the
insulation, allowing the fabrication
to be done in one easy step. The head of the pin is attached to the
nail, so there is no need to add
a washer.Reduced labor time - Neat, finished appearance
Available as Mini-Cup (MC) or Full-Size Cupped Head (CH) Style,
with a beveled head.Flat head
available as a special order.
Pins are also available "insulated" for welding through foil-faced
materials to prevent arcing on the
foil facia.Longer lengths available as special order.Length of pin
to be used is determined by the
thickness, density & composition of the insulation being installed.
Material:Galvanized steel,Stainless steel available on special
order
Pic of Bevel Edge Cup Head Insulation Weld Pins
Specifiaction of Bevel Edge Cup Head Insulation Weld Pins
| common size of duct liner Cupped Head Weld Pins |
| Cupped Head Weld Pins diameter | Base size | Length | Material | Finished |
| 2.7mm | 25mm, 30mm | 15-250mm | Mild steel ,stainless steel copper | Zinc/copper plating |
| 3mm | 25mm, 30mm | 15-250mm |
| 3.4mm | 25mm, 30mm | 15-250mm |
Feature of Bevel Edge Cup Head Insulation Weld Pins
| features of Bevel Edge Cup Head Insulation Weld Pins |
| BETTER PLATING | weldpin shanks Zinc and Chromate plated exceeding SMACNA standards
and providing a professional appearance.Quilting Cup Head
Insulation Pins are copper plated. |
| REDUCED DOWN TIME | Consistent point quality reduces frequency of machine adjustments. |
| STRONGER WELDS | Hardened steel point assures positive electrical contact for
complete sheet to pin fusion. |
| CORROSION RESISTANCE | Plating exceeds current SMACNA standards for corrosion resistance. |
| TEMPERATURE RANGE | Quilting Cup Head Insulation Pins function properly over normally
accepted operating range of temperatures of 0 degrees C to
121degrees C and are not adversely affected at temperatures of 0
degrees C to 287 degrees C. |
| VIBRATIONS | Quilting Cup Head Insulation Pins will not fatigue or be physically
affected by vibrations normally found in high velocity air handling
systems. |
Recommended assembly method:
1.Work surfaces should be clean and dry, free of dust, grease, oil
and any other loose matter.
2.Remove the protective release paper taking care not to touch the
adhesive.
3.Place the hanger in the required position and press the base
against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with
fastening clips but maximum strength of
adherence is achieved after 24 hours
Package of Insulation Mini Cupped Head Weld Pins:
Package : usually the package is 800/1000/1500 /2000/3000/5000 pcs
in carton on pallet
800/1000/15000/2000 in a drum on the pallet
Delivery :for big you choose by sea
for small order or agercy order ,you can choose express by
DHL,Fedex ,UPS ,ect
we can also supply door to door service by sea ,by air
