Attention:
1. This air suspension compressor pump solenoid coil is made of high quality components.

2. Replaces the original air compressor solenoid coil of your car and equal the original quality.
3. Please double confirm the compatibility as well as the OEM number before purchasing.
4. Instruction is not included. Professional installation is recommended.

 

Steps and methods for properly installing a solenoid valve coil:

1. Check if the solenoid valve and the selected parameters are the same, such as differential pressure, etc. If the error occurs, the solenoid valve coil will be burned out. Voltage fluctuations should be within the normal range and meet the rated voltage.

2. Before connecting the pipeline, flush the pipeline and remove the residual dirt in the pipeline. If there are residual stains, it will affect the normal use of the solenoid valve. To prevent this, a filter should be installed in the pipeline.

3. Install the solenoid valve coil of the solenoid valve vertically on the horizontal and ground pipes. If there is a special situation, it cannot be installed vertically. The appropriate solenoid valve should be ordered in advance, otherwise the solenoid valve will not work properly.

4. When installing, add a safety process and install a manual cutting valve to facilitate maintenance in case of failure.

5. Pay attention to the direction when installing, can not be reversed, installed in the direction indicated on the package, and can be reversed in some special cases such as vacuum.

6. If the water may be damaged by the medium, you must take appropriate protective measures or choose a solenoid valve with a waterproof hammer function.

7. The solenoid valve cannot be energized all the time, otherwise it will reduce its life. Note that normally open, normally closed solenoid valves cannot be used with care.

 

Product Features:
1. Using high quality wire which has UL approved; 2. Using high quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof coils and so on.
7. If you have special requirement, pls feel free to contact us.

 

Focus on your demands, Offer you best solution:

 

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

 

Welcome to your any question and inquiry! 

" }
Sign In | Join Free | My burrillandco.com
Home >

Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part

    Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers
     
    Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers
    • Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers
    • Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers
    • Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers
    • Buy cheap Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part from wholesalers

    Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part

    Ask Lasest Price
    Brand Name : BRANDO
    Model Number : BB09030027
    Certification : None
    Payment Terms : T/T, PayPal, Western Union
    Supply Ability : 100000pcs per month
    Delivery Time : Negotiation
    Price : Negotiation
    • Product Details
    • Company Profile

    Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part

    DIN43650B Connector 9.0mm AMISCO Type 4V Series Pneumatic Valve Solenoid Coil


    Applicable Industries:CNOMO Pilot Valve
    Type:Fittings
    Place of Origin:Zhejiang, China
    Brand Name:Brando
    Hole Size:9mm
    Height:30mm
    Width:29.5mm
    Voltage:AC220V, DC24V
    Power:10VA, 6W
    Connection Type:DIN 43650A
    Insulation class:F, H
    Protection class:IP65, IP67, IP68
    Application:30mm Pneumatic Pilot Valve CNOMO

    Dimension of BB09030027 Solenoid Valve Coil :

    Dimension of Pneumatic Solenoid Valve Coil :

    Technical Data:

    Model
    BB09030027
    Hole size
    9.0mm
    Height
    30mm
    Width
    30mm
    Voltages
    AC220V, DC24V
    Power
    10VA, 6W
    Insulation class
    F, H
    Connection Type
    DIN43650A
    Application examples
    30mm CNOMO Pneumatic Pilot Valve

    Details:


    hole sized2d3
    Hole Size 9.0mmHeight 30mmWidth 30mm

    Solenoid Coil Production Line:


    Attention:
    1. This air suspension compressor pump solenoid coil is made of high quality components.

    2. Replaces the original air compressor solenoid coil of your car and equal the original quality.
    3. Please double confirm the compatibility as well as the OEM number before purchasing.
    4. Instruction is not included. Professional installation is recommended.


    Steps and methods for properly installing a solenoid valve coil:

    1. Check if the solenoid valve and the selected parameters are the same, such as differential pressure, etc. If the error occurs, the solenoid valve coil will be burned out. Voltage fluctuations should be within the normal range and meet the rated voltage.

    2. Before connecting the pipeline, flush the pipeline and remove the residual dirt in the pipeline. If there are residual stains, it will affect the normal use of the solenoid valve. To prevent this, a filter should be installed in the pipeline.

    3. Install the solenoid valve coil of the solenoid valve vertically on the horizontal and ground pipes. If there is a special situation, it cannot be installed vertically. The appropriate solenoid valve should be ordered in advance, otherwise the solenoid valve will not work properly.

    4. When installing, add a safety process and install a manual cutting valve to facilitate maintenance in case of failure.

    5. Pay attention to the direction when installing, can not be reversed, installed in the direction indicated on the package, and can be reversed in some special cases such as vacuum.

    6. If the water may be damaged by the medium, you must take appropriate protective measures or choose a solenoid valve with a waterproof hammer function.

    7. The solenoid valve cannot be energized all the time, otherwise it will reduce its life. Note that normally open, normally closed solenoid valves cannot be used with care.


    Product Features:
    1. Using high quality wire which has UL approved; 2. Using high quality permeablity magnetic material which contain low carbon;
    3. Using high quality housing material like PA66, PBT, PPS, BMC and so on.
    4. Insulation class can be B, F, H, N, C;
    5. Protection class can be IP65, IP67 & IP69K;
    6. We also offer special coils like ex-proof coils, water proof coils and so on.
    7. If you have special requirement, pls feel free to contact us.


    Focus on your demands, Offer you best solution:


    √ Contact us if some points you have doubt
    √ Contact us if somewhere need to change
    √ Contact us if not the one you are looking for
    √ Contact us if you are doing designing


    Welcome to your any question and inquiry!

    Quality Amisco Type 9.0mm Hole Size Electrical Coil CNOMO Pneumatic Valve Spare Part for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Ningbo Brando Hardware Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Solenoid Valve Coil products from this supplier
    Inquiry Cart 0