AMP 6.3 x 0.8 EVI 7/8 Solenoid Coil For Pneumatic Solenoid Valve
Applicable Industries:Solenoid Valve
Type:Fittings
Place of Origin:Zhejiang, China
Brand Name:Brando
Hole Size:8mm
Height:29mm
Width:22mm
Voltage:AC220V, DC24V
Power:6.5VA, 3W, 5.5W, 6W
Connection Type:DIN43650B
Insulation class:F, H
Protection class:IP65, IP67, IP68
Application:Pneumatic valve
Dimension of Pneumatic Valve Solenoid Coil :
Technical Data:
Model | |
Hole size | |
Height | |
Width | |
Voltages | |
Power | |
Insulation class | |
Connection Type | |
Application examples | |
Details:
 |  |
| Hole size 8.0mm | Height 29.0mm |
Attention:
1. This air suspension compressor pump solenoid coil is made of
high quality components.
2. Replaces the original air compressor solenoid coil of your car
and equal the original quality.
3. Please double confirm the compatibility as well as the OEM
number before purchasing.
4. Instruction is not included. Professional installation is
recommended.
Why do solenoid coils burn out?
Solenoid coils are designed to convert electrical energy into
mechanical movement by means of a magnet field, which means as they
consume power like a light bulb for example they will become hot,
and the higher the wattage or power consumption or the longer they
are switched ON the hotter they can become.
If the coil becomes too hot or above its temperature rating (copper
winding class rating) the copper or insulating material can fail to
short circuit.
Other reasons include high media or ambient temperatures preventing
the coil from cooling sufficiently, water ingress between armature
and coil or if the coil is removed whilst energised!!
Steps and methods for properly installing a solenoid valve coil:
1. Check if the solenoid valve and the selected parameters are the
same, such as differential pressure, etc. If the error occurs, the
solenoid valve coil will be burned out. Voltage fluctuations should
be within the normal range and meet the rated voltage.
2. Before connecting the pipeline, flush the pipeline and remove
the residual dirt in the pipeline. If there are residual stains, it
will affect the normal use of the solenoid valve. To prevent this,
a filter should be installed in the pipeline.
3. Install the solenoid valve coil of the solenoid valve vertically
on the horizontal and ground pipes. If there is a special
situation, it cannot be installed vertically. The appropriate
solenoid valve should be ordered in advance, otherwise the solenoid
valve will not work properly.
4. When installing, add a safety process and install a manual
cutting valve to facilitate maintenance in case of failure.
5. Pay attention to the direction when installing, can not be
reversed, installed in the direction indicated on the package, and
can be reversed in some special cases such as vacuum.
6. If the water may be damaged by the medium, you must take
appropriate protective measures or choose a solenoid valve with a
waterproof hammer function.
7. The solenoid valve cannot be energized all the time, otherwise
it will reduce its life. Note that normally open, normally closed
solenoid valves cannot be used with care.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
