Lead Wire Solenoid Coil AC220V 5VA DC24V 2.8Watt For 4V110 Pneumatic Valve

Lead Wire Solenoid Coil AC220V 5VA DC24V 2.8Watt For 4V110 Pneumatic Valve ​

Applicable Industries:Solenoid Valve
Type:Fittings
Place of Origin:Zhejiang, China
Brand Name:Brando
Hole Size:8.0mm
Height:23.5mm
Width:17.5mm
Voltage:AC220V, DC24V
Power:5VA, 2.8W
Connection Type:Lead wire
Insulation class:F, H
Protection class:IP65, IP67, IP68
Application:4V110 pneumatic valve

Standard coils are available for insulation classes E, F and H. The insulation class determines the coil’s maximum operating temperature for a specific life:
-Class F: 20 000 hours
-Class H: 30 000 hours

Class F coils are rated to 155℃, basically the copper wire windings can withstand a working temperature up to but not exceeding 155℃. This are the most common form of solenoid coil and are ideally suited to working ambient temperatures up to 20 ℃ and media up to 100℃.

Class H coils are rated to 180℃, basically the copper wire windings can withstand a working temperature up to but not exceeding 180C. This are the most common form of solenoid coil and are ideally suited to working ambient temperatures up to 50 ℃ and media up to 180℃.

Class N coils are rated to 200℃, basically the copper wire windings can withstand a working temperature up to but not exceeding 200℃. This are the most common form of solenoid coil and are ideally suited to working ambient temperatures up to 80 C and media up to 200℃.

Dimension of 4V110 series pneumatic valve Solenoid Coil :

Technical Data:

​Attention:​

1. This air suspension compressor pump solenoid coil is made of high quality components.
2. Replaces the original air compressor solenoid coil of your car and equal the original quality.
3. Please double confirm the compatibility as well as the OEM number before purchasing.
4. Instruction is not included. Professional installation is recommended.

Steps and methods for properly installing a solenoid valve coil:

1. Check if the solenoid valve and the selected parameters are the same, such as differential pressure, etc. If the error occurs, the solenoid valve coil will be burned out. Voltage fluctuations should be within the normal range and meet the rated voltage.

2. Before connecting the pipeline, flush the pipeline and remove the residual dirt in the pipeline. If there are residual stains, it will affect the normal use of the solenoid valve. To prevent this, a filter should be installed in the pipeline.

3. Install the solenoid valve coil of the solenoid valve vertically on the horizontal and ground pipes. If there is a special situation, it cannot be installed vertically. The appropriate solenoid valve should be ordered in advance, otherwise the solenoid valve will not work properly.

4. When installing, add a safety process and install a manual cutting valve to facilitate maintenance in case of failure.

5. Pay attention to the direction when installing, can not be reversed, installed in the direction indicated on the package, and can be reversed in some special cases such as vacuum.

6. If the water may be damaged by the medium, you must take appropriate protective measures or choose a solenoid valve with a waterproof hammer function.

7. The solenoid valve cannot be energized all the time, otherwise it will reduce its life. Note that normally open, normally closed solenoid valves cannot be used with care.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on