18 Seconds Delay Auto Flush For Domestic Ro System Plastic Water Latching Solenoid Valve

18 Seconds Delay Auto Flush For Domestic Ro System Plastic Water Latching Solenoid Valve

RO water solenoid valve is used inReverse Osmosis System.The valve is assembled with high quality copper wire solenoid coil, and no leaking armature tube assembly. The valve body is made of Plastic (PP,POM,Nylon). All water Purifier products available in RO are made of food grade plastic for retaining the purity of the soft water .

Reverse Osmosis systems

A simple reverse osmosis system consists of a high-pressure pump which increases the pressure of the feed water with salts, ions or impurities. This forces the water across the semi permeable RO (Reverse Osmosis) membrane, leaving behind all the dissolved salts. The required pressure is directly proportional to the salt concentration of the inlet water. The higher the concentration, the higher pressure is required to overcome the osmotic pressure.

The RO membrane lets the cleaner water through and this is called permeate water. The salts and other contaminants which are stopped by the membrane come out as a reject stream. This can be drained out or recycled if possible through the RO system to save water.

The RO systems remove up to 99% of dissolved salts (ions), particles, pathogens and bacteria from feed water.

No concentrated water is discharged from the concentrated water pipe
No concentrated water is discharged from the concentrated water pipe, and the TDS value of pure water is the same as that of tap water
Possible reasons:
◆ It may appear after the product has just been installed, the water machine has been disassembled in a larger area, or after the new installation. It may be wrong to connect the water pipe between the high-pressure pump and the RO membrane membrane shell directly to the tee of the rear activated carbon, so that the tap water from the high-pressure pump directly enters the water storage bucket.
Approach:
◆ Correct connection


Place of Origin: Zhejiang, China
Brand Name: Brando
Model Number: BPV10
Application:ro system,water dispenser, RO system
Material:PP,POM,Nylon
Temperature of Media:Medium Temperature
Pressure:Medium Pressure, max 8 bar
Power:Solenoid
Media:water,air
Port: NPT1/4''
Structure:direct acting, direct acting
Standard or Nonstandard:Standard
Temperature:Medium

Main Dimension of RO Solenoid Water Valve:


Technical data:

Brando Factory Production of Solenoid Valves:

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on