Strong Applicability 2000Kg Hoist For Building Construction
Hoist For Building Construction Introduction
The SC series of construction elevators are widely used at the
sites of industrial and civil construction, bridge construction,
underground construction, large chimney construction, ship industry
and so on. Being suitable for the vertical transport of materials
and people, they can also be used as permanent / semi-permanent
electric elevators and in various sites like warehouses and high
towers.
This series of construction elevators, which are known for their
stable performance, reliable safety, easy transportation and strong
adaptability, can enhance work efficiency and reduce workers labor
intensity.
Hoist For Building Construction Standard Configuration
There is a small crane for conenient assembly of the construction
lift.
Available in single or twin hoist cage configuration.
Frequency control makes the construction hoists starting and
stopping very smoothly, with low starting current and much less
wear and tear.
Manual or Automatic Controls of the hoist is optional.
Hoist For Building Construction Optional Configuration
* Rack and pinion elevator cage flap door as loading/unloading
ramp.
* Elevator car 'C' door for convenient loading/unloading.
* Sliding Contact Line (Integrated Conductive Rail or Busbar)
specially for rack and pinion lifts.
Hoist For Building Construction Parameters
| Technical Data | KP-B07, B08 |
| Payload Capacity | 2,000 kg |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 450 m |
| Cage Width (internal) | 1.5 m |
| Cage Length (internal) | 3.2 m |
| Cage Height (internal) | 2.35 m |
| Motor Control | FC control |
| Engine Power | 2x15 kw |
| Gearbox | Helical Reducer |
| Safety Device | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast Section | Square column 650*650*1508 mm with bolted rack |
| Rack Module | 8 |
