SBFEC Type New Version Solenoid Coil Repair Kit For DMF Series Dust
Collector Pulse Valve AC220V DC24V
The DMF-Z solenoid/diaphragm valve is kind of vertical-angle valve,
with an included angle of 90° between inlet and outlet. It
simplifies the connection between gas bag and blowing tube of a
dust collector. It can provide stronger airflow and meet dust
removing requirements.
The DMF-Y solenoid/diaphragm valve is kind of
submerged valve (namely, insert valve), which is installed directly
on a secondary gas bag and achieves better circulation quality. The
valve has less pressure loss, and is applicable to the operations
with lower gas pressure.
The DMF-ZM Solenoid/Diaphragm valve pulse jet valve is kind of
vertical-angle valve similar to the z-series valves, suitable for
connection between gas bag and blowing tube of a dust collector. It
has fixed nuts for installation purposes at the inlet and outlet
end, for easier installation and application.
The DMF-T solenoid/diaphragm valve is kind of through valve, with
an included angle of 180° between the inlet and outlet (central
line of both inlet and outlet are the same straight line). Also,
the inlet is connected to a gas storage tank, while its outlet is
connected to a blowing tube.
Hole Size:13.5mm
Height:41.2mm
Width:36.0mm
Voltages:AC220V, DC24V
Power:25VA, 20W
Connection Type:DIN43650A
Protection Grade:IP65
Insulation Class:F, H
Enameled wire material:Copper
Application:SBFEC Type New DMF Series Pulse Valve
Dimension:
Technical Data:
Model No | |
Hole Size | |
Height | |
Width | |
Connector | |
Insulation Class | |
Voltages | |
Powers | |
Application | New Version BFEC DMF Series Pulse Valves |
Why Choose Us:
Ningbo Brando Hardware is professional solenoid valve and solenoid
valve repair kit manufacturer. After years of constant innovation
and development, the development of products stable performance,
reliable quailty. Foucus on quality, meticulous. Details determine
success failure. Advanced processing equipment, reliable quality
assurance, first-class testing equipment. Technology as support to
technology as the basis, implementing the full sense of quality.
Product Characteristic:
1. Using high quality wire which has UL approved;
2. Using high quality permeablity magnetic material which contain
low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on;
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on;
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
