YL10.2 Dia1-22mm Stock Tungsten Carbide Blanks Rod For Graver And
Reamer
We manufactured and stocked a large range of tungsten carbide rod
for you.
Our Diameter from 0.3mm to 40mm,
length in 310mm, 330mm or 340mm, or any length.
Grade inYL10.2, K10, K20 K30, K35 or etc.
Dimentions of Wholesale Tungsten Carbide Rods
| Dia 0.5 | Dia 1.5 | Dia 2.5 | Dia 9.0 | Dia 20.0 | | Dia 0.6 | Dia 1.6 | Dia 3.0 | Dia 10.0 | Dia 21.0 | | Dia 0.7 | Dia 1.7 | Dia 4.0 | Dia 11.0 | Dia 22.0 | | Dia 0.8 | Dia 1.8 | Dia 4.5 | Dia 12.0 | Dia 23.0 | | Dia 0.9 | Dia 1.9 | Dia 5.0 | Dia 13.0 | Dia 24.0 | | Dia 1.0 | Dia 2.0 | Dia 5.5 | Dia 14.0 | Dia 25.0 | | Dia 1.1 | Dia 2.1 | Dia 6.5 | Dia 15.0 | Dia 26.0 | | Dia 1.2 | Dia 2.2 | Dia 7.0 | Dia 16.0 | Dia 27.0 | | Dia 1.3 | Dia 2.3 | Dia 7.5 | Dia 18.0 | Dia 28.0 | | Dia 1.4 | Dia 2.4 | Dia 8.0 | Dia19.0 | Dia 30.0 | | Note: Customized precision grounded rods are available. |
|
Application of tungsten carbide rod
Our tungsten carbide rod manufactured with high hardness and
toughness, vibration-resistance, especially no stick when working.
It is widely used for making
- various kinds of carbide solid tools and cutting tools, such as
drills, end mills, thread taps, rotating file,etc.
- A good material for general-purpose. Suitable for machining
carbon steel, cast irons, stainless steel, heat-resistance steel,
nickel based alloys and titanium alloys.
- Tungsten Carbide wear Parts
- Tungsten Carbide Mouldingdies
Various types
Solid rods
Single Central hole rods
Double parallel hole rods
Double helical 30° 40° hole rods
Chmafered rods
One side chamfered with weldon shank rods
Special customized rods
Production Info.
1. Hardness can reach to HRA 94 max, TRS ≥4000 N/mm²
2. Various dimension of the rods can be supplied, also can
customized as your requirements.
3. Blank rods and polished rods available
4. The minimum diameter is φd 0.3mm and the tolerance can reach to
±0.001mm.
5. Common diameter from 1mm---35mm
6. Blank Diameter tolerance: +0.3--0.8mm; length tolerance:
+0.3--1.8mm
7. Ground tolerance generally h5/h6, can based on your requirement.
Product features:
1. Using100% virgin raw material guaranteed products quality
2. Our tugnsten carbide rods use dry isostatic pressing machine and
low press sintering technology, which showed uniform distribution
of cobalt magnetic, high hardness and bending strength.
3. Inner structure are more compact and well distributed in
metallographic test.
4. It can reach a mirror effect surface after accurate grinding.
5. Perfect quality control systerm: ISO9001:2015
6. customization is avaliable
Grade information
| Carbide Grade | ZF06C | ZF08C | ZF12C | ZF10CS | ZF10CF | ZF10C |
| WC | % | 94 | 92 | 88 | 90 | 90 | 90 |
| Co | % | 6 | 8 | 12 | 10 | 10 | 10 |
| Grain Size | μm | 0.4 | 0.4 | 0.4 | 0.4 | 0.6 | 0.8 |
| Density | g / c m³ | 14.85 | 14.65 | 14.25 | 14.4 | 14.4 | 14.4 |
| Hardness | HRA | 94 | 93.5 | 92.3 | 93 | 92.5 | 91.5 |
| TRS | N / m m² | 4000 | 4000 | 3800 | 3800 | 3600 | 3600 |
| Grade | Recommendation |
| ZF06C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
6%. Be suitable for processing aluminum- magnesium alloy, glass
fiber, carbon fiber, wood, hard plastic, etc. Recommend for making
micro tools and drills. |
| ZF08C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
8%. Be suitable for processing resin, wood, titanium alloy,
stainless steel, copper-aluminum alloy, composite material.
Recommend making high speed drill, end mill, graver and micro-drill
PCB with diameter less than 0.8mm. |
| ZF12C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO
12%. Be suitable for semi-finishing and finishing process of
stainless steel, mold steel and normal titanium alloy, etc.
Recommend for making all types of high speed end mills, reamers and
gravers. |
| ZF10CS | This tungsten carbide rod is with 0 . 4 μ m ultrafine particles and
CO 12 %, higher hardness . Be suitable for finishing process of
stainless steel , mold steel and normal titanium alloy , etc .
Recommend for making all types of high speed end |
| ZF10CF | This tungsten carbide rod is with 0 . 6 μ m Sub - micron particles
and CO 10 %, which is widely used in cutting tools . Be suitable
for rough finishing , semi - finishing and finishing of mold steel
, grey cast iron , austenitic stainless steel and heat - resistant
alloy . Recommend for making normal drill and end mill |
| ZF10C | This tungsten carbide rod is with 0 . 8 μ m Sub - micron particles
and CO 10 %. Be suitable for rough finishing and semi - finishing
of normal steel , cast iron and stainless steel . Recommend for
making normal drill and end mill |
Our packing
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
Our tungsten Carbide Rod Type
blank tungsten carbide rod, ground carbide rod, carbide rod with
hole, fixed carbide rod, chamfered carbide rod
We always persuit long term business with our clients by our good
quality. please do not hesitate to contact us at any time
