Stainless Steel Type 17-7PH SUS631 Cold Rolled Steel Sheet, Plate
And Strip In Coil
17-7PH is a chromium-nickel-aluminum precipitation hardening
stainless steel that provides high
strength and hardness and a moderate level of corrosion resistance
up to 600˚F.
| C | Si | Mn | P | S | Cr | Ni | Al |
| 0.09 | 1.00 | 1.00 | 0.040 | 0.030 | 16.00~18.00 | 6.5~7.75 | 0.75~1.50 |
This grade can be easily formed in the austenitic condition similar
to Type 301 stainless steel and hardened
to high strength levels using relatively low heat treatments that
minimize distortion.
The corrosion resistance of 17-7PH is comparable to that of Type
304 stainless steel, especially in the
CH 900 temper, and it has been used for spring applications,
washers, eyelets, fittings and fasteners.
Heat treatments can strengthen this 17-7PH type of stainless steel.
The typical process for 17-7PH stainless heat treatment has three
or four steps:
Conditioning using austenite.
Cooling, which turns the austenite into martensite.
Precipitation hardening until Condition TH 1050 or RH 950 has been
reached.
To achieve the highest mechanical properties Condition A material
is transformed to martensite at
the mill by cold reduction to Condition C.
After fabrication by the user, a single low-temperature heat
treatment is preformed to achieve condition CH 900.
Applications
- Springs and washers
- Chemical processing equipment
- Heat exchangers
- Power boilers
- Superheater tubes
Product forms
- Sheet
- Strip and foil
- Plate
- Bar, Wire
- Forgings
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
