Best-Nr.0200M Solenoid Valve Coil DC24V AC110V AC220V 50Hz 15VA
With MPM DIN43650A Connector
This Best-Nr.0200 solenoid coil is widely used in all kind of
solenoid valves. A solenoid valve opens and closes when the proper
AC or DC voltage is applied to the coil. The coil consists of an
enamel coated copper wire winding and usually some magnetically
permeable metal frame or housing, which may be visible or contained
in molding. There may or may not be a thermal cutoff or fuse in
electrical series with the winding. More complex coils have diode
bridges that rectify AC to DC power, and even circuits which can
control periodic inrush of current. The combination of the copper
coil, the magnetically permeable surrounding material, and plunger
inside the pressure boundary of the valve are collectively known as
the “solenoid”.
YouTube video of Best-Nr.0200 Solenoid Coil For Solenoid Valve:
Main dimension of Solenoid Coil With MPM DIN 43650A Connector:
Product details of DC24V AC220V Best-Nr.0200 Solenoid Valve Coil:
Technical parameters of Best-Nr.0200 Solenoid Valve Coil:
Model | |
Name | |
Hole size | |
Height | |
Width | |
Voltages | |
Power | |
Insulation class | |
Connector | |
Application examples | Solenoid Valve, Pneumatic Valve, Pulse Valve, Diaphragm Valve |
Brando factory production video of solenoid valve coils:
Product Characteristic:
1. Using high quality wire which has UL approved;
2. Using high quality permeablity magnetic material which contain
low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on.
7. If you have special requirement, pls feel free to contact us.
Environmental Conditions
Abnormally high or abnormally low ambient temperatures to which a
solenoid is exposed for an extended time may cause a solenoid to
burn out.
High Temperature. Coil insulation may be damaged and one layer of wire may short to
the next layer. A heat shield or baffle will give some protection
against radiated heat. High temperature or oil immersed solenoids
are the best protection against heat conducted either through metal
surfaces or from surrounding high temperature air.
Low Temperature. Cold ambient temperatures cause oil to become more viscous,
possibly overloading solenoid valve capacity (See Item 9).
Mechanical parts of the valve or solenoid structure may distort,
causing the valve spool to stick and burn out the solenoid coil.
Use an oil more suitable for the low temperature, or use an oil
immersed or high temperature coil to handle the greater load
imposed by the abnormally low ambient temperature.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
