Digital Precious Metal Platinum Jewellry Purity Analyser Meter
SP-1200PM
Application of this Silver Purity Testing Machine machine
pawn broking, bank, jewelry shop, precious-metals recovery, jewelry
factory, Gemstone Testing Center,precious metals researching.etc.
In accordance with archimedes principle water buoyancy method,
GB/T1423 of precious metals testing standard,and so on.
Combine archimedes principle with micro electronic technique;adopt
sensor imported from Germany,the purity can be calculated through
measuring density of precious metals.features of no damage on
sample;simple operation,fast and accurate.
K value of gold,PT value of platinum,density value,purity
percentage can be measured.
Silver Purity Testing Machine Apply to :
- Precious metal.such as gold,Karat gold,platinum,silver.
- Mixed metal or other alloy metal.
- Jewelry materials.such as ring,necklace,bracelet,watchband,belt
fastener,gold ingot,gold bar,statue,coin.,etc.
Silver Purity Testing Machine Features:
* Multi-mode, gold mode, platinum mode, other precious metals mode
can be switched.
* Top and bottom limitation of K value, purity and density of gold.
And prompt alarm.
* Automatic zero tracking, buzzer warning, and overload warning.
* No damage testing, cleaning and environmental protection.
* Could be used as precision balance.
* Water and other liquids could be used as measurement medium.
* RS-232C is included.
Technical parameter of Silver Purity Testing Machine:
| Model | SP-2000K | SP-3000K | SP-5000K |
| Capacity | 0.01~2000g | 0.01~3000g | 0.01~5000g |
| Density Resolution | 0.001g/cm3 | 0.001g/cm3 |
| Measuring Time | 10~15s |
| Measuring Principle | Archimedes principle |
| Testing Board | Unibody high-capacity plastic testing board |
| Gold Mode | Display K Value | The K value of mixture of gold, silver, and copper; mixture of gold
and copper; mixture of gold and silver |
| Display Purity Percentage | The purity content of mixture of gold, silver and copper; mixture
of gold and copper; mixture of gold and silver |
| K Value Range | 9K~24K |
| Copper and Silver Proportion Setting | Cycle setting depends on user’s preference (default 7:3) |
| Platinum Mode | Display Value | PT percentage, density value, volume |
| PT Value Range | Pt600~Pt1000 |
| Calibration Mode | Auto correction, auto detection |
| Standard Accessories | Tank, testing board, tweezer, thermometer, weight, windshield,
power transformer, a set of gold particle measuring assembly |
| Option Accessories | Printer(RS-232) |
| Power Supply | AC110/220V±10%, 50/60HZ |
Measurement Procedure
a) measure the gold weight in air,and then press the ENTER button
to memory.
b) Place the gold into water to measure the weight,and then press
the ENTER button to memory.show the K value of gold,purity
percent,density value.
Standard accessories
Host,sink,test board,tweezer,thermometer,weight,wind and dust
cover,a set of measuring particle parts,a set of measuring floating
body parts,power transformer.
Contact us feel free if you have any special requirement .
