Light Weight Mini Portable Mixed Metal Testing Meter High Precision
Metal Testing Meter Specifications:
The high-precision digital solid density test equipment is mainly used in rubber, plastic, wire and cable, food, composite materials, shoe materials, glass, precious metal hardware
recovery and other industries. Solids, granules, thin-film body, the floating body, a powder body of the
sample can be directly read out the average weight, the average weight in the water, and the specific gravity
value, density, volume, the percentage in the
air,convenient and quick.
Metal Testing Meter Apply to :
Precious metal.such as gold,Karat gold,platinum,silver.
Mixed metal or other alloy metal.
Jewelry materials.such as ring,necklace,bracelet,watchband,belt
fastener,gold ingot,gold bar,statue,coin.,etc.
Metal Testing Meter Features
- Distinguish whether the gold,karat gold,platinum,silver,other
precious metal is the genuine or not.
- Test the purity of gold,karat gold,platinum,silver to confirm if
the marked content is correct or not.
- No need to cut samples;also it can be measured immediately.
- Can shift to measure Karat and purity percentage of gold-silver
-copper,gold-copper,gold-silver respectively.
- Function of density measuring and normal gram scale.
- Either water or alcohol would be as medium.
- Function of setting actual water temperature.
- Adopt completed injection molding PC sink(length:15.3cm X
width10.7cm X 9.3cm)
- Including RS-232 interface;It's convenient to connect PC and
printer.AU-40 could be optionally availabe to print result.
- Adopt injection moulding windproof dustproof shield;Convenient
configuration;Better durability.
- Power supply:AC 100V-240V;50HZ/60HZ(Europe standard)
Density tester technical parameter :
| Model | SP-300PM | SP-600PM | SP-900PM | SP-1200PM |
| Weight | Range | 0.005~300g | 0.005~600g | 0.01~900g | 0.01~1200g |
| Standard deviation | 0.005g | 0.005g | 0.01g | 0.01g |
| Density | readability | 0.001 g/cm3 |
| Testing board | ABS injection moulding |
| Density range | 0.001~99.999g/cm3 |
| Result display | Apparent density,volume density,wet density,overall
porosity,effective porosity,open pore volume,bulk volume,oil
content,water absorption |
| Measuring time | About 5 seconds |
Opening lid
method for
testing board | Unobstructed without lifting lid design |
| Water tank | Completed injection moulding transparent PC water
tank(size:length15.3 cm×witdth10.7 cm×height9.3cm) |
| Parameter setting | Water temperature setting,measuring medium density setting,primary
materials and secondary materials setting,air density
setting,suspension wire buoyancy deviation setting |
| Calibration method | Single key calibration,automatically testing |
| Standard components | (1) host(2)water tank(3)testing board(4)tweezers(5)thermometers
(6)weight(7)windproof dustproof cover(8)power transformer |
| interface | Standard RS-232 interface |
| Optional accessories | SP-40 printer,data connecting wire |
| Power supply | AC100V~240V 50HZ/60HZ (Europe standard) |
Measurement Procedure
a) measure the gold weight in air,and then press the ENTER button
to memory.
b) Place the gold into water to measure the weight,and then press
the ENTER button to memory.show the K value of gold,purity
percent,density value.
Standard accessories
Host,sink,test board,tweezer,thermometer,weight,wind and dust
cover,a set of measuring particle parts,a set of measuring floating
body parts,power transformer.
Contact us feel free if you have any special requirement .
