Precious Metal Gold Silver Density Tester High Precision Meter
SP-300PM
Density tester specifications:
The high-precision digital solid density test equipment is mainly used in rubber, plastic, wire and cable, food,
composite materials, shoe materials, glass, precious metal hardware
recovery and other industries. Solids,
granules, thin-film body, the floating body, a powder body of the
sample can be directly read out the average
weight, the average weight in the water, and the specific gravity
value, density, volume, the percentage in the
air,convenient and quick.
Apply to
Precious metal.such as gold,Karat gold,platinum,silver.
Mixed metal or other alloy metal.
Jewelry materials.such as ring,necklace,bracelet,watchband,belt
fastener,gold ingot,gold bar,statue,coin.,etc.
Density tester features
a) The purity of gold,platinum,and other precious metals can be
measured in a short time.the fake can be distinguished.
b) No damage testing, cleaning and environmental protection.
c) Measuring just need 15 seconds,convenience,stabilization,and
accuracy.
d) Multi-mode,gold mode,platinum mode,other precious metals mode
can be shifted.
e) Multi-function;the purity of other precious metals can be
measured.such as tin,copper,silver.,etc.also can be used as
precision balance.
f) Function of top and bottom limitation;it can display"OK,HI,LO"
in the state of qualified,exceed,less;Prompt alarm.
g) Function of automatic zero tracking,buzzer warning,and overload
warning.
h) Function of solution compensation.necessary if liquid other than
water is used as a medium for measurement.
i) Adopt the completed high-capacity transparent injection mould
sink,which can resist damage and corrosion.
j) Adopt the completed special windproof and dustproof cover,which
is convenient and durable.
k) Interface of RS-232C is included.the machine is available to
connect PC with printer.
Density tester technical parameter :
| Model | SP-300PM | SP-600PM | SP-900PM | SP-1200PM |
| Weight | Range | 0.005~300g | 0.005~600g | 0.01~900g | 0.01~1200g |
| Standard deviation | 0.005g | 0.005g | 0.01g | 0.01g |
| Density | readability | 0.001 g/cm3 |
| Testing board | ABS injection moulding |
| Density range | 0.001~99.999g/cm3 |
| Result display | Apparent density,volume density,wet density,overall
porosity,effective porosity,open pore volume,bulk volume,oil
content,water absorption |
| Measuring time | About 5 seconds |
Opening lid method for testing board | Unobstructed without lifting lid design |
| Water tank | Completed injection moulding transparent PC water
tank(size:length15.3 cm×witdth10.7 cm×height9.3cm) |
| Parameter setting | Water temperature setting,measuring medium density setting,primary
materials and secondary materials setting,air density
setting,suspension wire buoyancy deviation setting |
| Calibration method | Single key calibration,automatically testing |
| Standard components | (1) host(2)water tank(3)testing board(4)tweezers(5)thermometers (6)weight(7)windproof dustproof cover(8)power transformer |
| interface | Standard RS-232 interface |
| Optional accessories | SP-40 printer,data connecting wire |
| Power supply | AC100V~240V 50HZ/60HZ (Europe standard) |
Measurement Procedure of Gold Silver Density Tester
a) measure the gold weight in air,and then press the ENTER button
to memory.
b) Place the gold into water to measure the weight,and then press
the ENTER button to memory.show the K value of gold,purity
percent,density value.
Standard accessories of Gold Silver Density Tester
Host,sink,test board,tweezer,thermometer,weight,wind and dust
cover,a set of measuring particle parts,a set of measuring floating
body parts,power transformer.
Contact us feel free if you have any special requirement .
