Exporting Stainless Steel Chevron Plate Mist Eliminator, Vane Pack
Demister, Desulfurization Tower Droplet Eliminator
Chevron plate demister is mainly used for flue gas desulfurization
and separation of droplets in waste gas. It has the advantages of
simple structure, high capture efficiency for medium size and large
size droplets, low pressure drop, easy flushing, open structure,
easy maintenance and low cost.
Mainly there are two types of plates, 2 pass type (170mm net height
and 200mm total height with frame), 3 pass type (230mm net height
and 250mm total height with framesm). The shape and size of mist
eliminator can both be customized as per order. Square shape, round
shape, etc.
The 3 pass type has higher de-misting efficiency. It is always used
in less solid fouling circumstances because of a little harder
washing than 2 pass type.
A method to estimate weight of stainless steel vane pack demister
| Type | corrugated plate height /mm | total demister height /mm | orignal plate width
/mm | frame size /mm |
| 2 pass | 170 | 200 | 200 | H:40*W:20 |
| 3 pass | 230 | 250 | 280 | H:40*W:20 |
For example, if the required plate distance is 25mm, it takes about
37 pcs of 1m length corrugated plates and necessary frames to build
a 1m*1m chevron mist eliminator. Then the mist eliminator unit
weight =37*single plate weight+frame weight (properly estimated).
Working principle of vane pack demister: when the gas containing mist flows through the demister at a
certain speed, because of the inertial impact of the gas, the mist
and wave plate collide and are attached to the wave plate surface.
The diffusion of the mist on the surface of the corrugated plate
and the gravity settlement of the mist cause the mist to form large
droplets and move forward with the air flow to the turning of the
corrugated plate. Because of the centrifugal force of the steering
and its friction with the corrugated plate, the adsorption and the
surface tension of the liquid, the droplets become larger and
larger until the concentrated droplets are larger than the gravity
generated by themselves, which exceeds the lifting force of the gas
and the surface tension of the liquid. When the force is applied,
the droplets are separated from the surface of the wave plate. The
multi fold structure of the wave plate of the mist eliminator
increases the chance of catching and gathering the mist, and the
undeleted mist will catch and gather at the next turn through the
same function, so it will work repeatedly, thus greatly improving
the efficiency of mist eliminator. After the gas passes through the
chevron mist eliminator, there is basically no mist.
Operation range and capture efficiency reference chart for different droplet sizes (Quoted from
world-leading manufacturers).
Welcome your contact any time! We are ready to be helpful!
