3540mm Diameter PP Vane Pack Demister 170mm Plate Height 3 Units
The vane pack mist eliminator consists of a set of chevron corrugated plates with well defined
geometry. It is very popular and useful internals for gas liquid
separation applications. These plates according to design and shape
can remove the droplets more than 8 microns.
Hualai factory has been producing a range of vane pack mist
eliminators for critical applications in industrial use. Standard
Material of vane type mist eliminator is polypropylene & stainless
steel.
Vane Pack mist eliminator in this case:
| Item | Value | Unit |
| Material | PP | / |
| Shape & Size | Φ3540 | mm |
| Thickness | 200 | mm |
| Vane plate type | C type, without hook | / |
| Vane plate height | 170 | mm |
| Pitch of vane | 25 | mm |
| Frame | slotted grids and through rods | / |
| Section | 6 | / |
Applications of vane pack demister
Vane pack mist eliminator is widely used in various applications to
separate liquid droplets from gas streams, in all applications
where a contact between liquid and flowing gas, the vane pack
demister can supply a good performance. Additionally, tiny mist
droplets can be carried away with the gas.
It is widely used in the foaming system and high liquid viscosity
system in refineries, chemicals, petrochemicals, pharmaceuticals,
dyes and intermediates, aromatics and other process industries.
An option of different vane plate for higher efficiency
requirement:
Also in this photo we can see another construction method of using
only through rods. The the layer height is same with the vane plate
height, which is 170mm or about 230mm.
Removal of very small droplets can be achieved using a two stage
mist eliminator by fitting a mesh pad to the upstream face of the
unit to coalesce droplets as small as 4 to 5 microns into droplets
in the size range which are easily removed by the vane separator.
Welcome your inquiry anytime! We are ready to provide any possible
help we can!
