Low Maintenance Sanitary Centrifugal Pump For Biological
Engineering
Sanitary Centrifugal Pump Introduction
Continuously upgrading thinking mode and innovation
consciousness,realizing set objectives of the enterprise through
wisdom
Sanitary Centrifugal Pump Application
The GKH sanitary centrifugal pump is a kind of highly-efficient and
economic centrifugal pump. In addition to meeting the requirements
for sanitation and soft treatment to products, it also has chemical
stability. The GKH sanitary centrifugal pump is widely used for
conveying various liquid materials in such fields as dairy, beer,
beverage, medicine, biological engineering, fine chemical industry,
etc. It can be used to convey ordinary solutions of low and medium
viscosity, and solutions containing suspension or corrosive
solutions.
The form of the GOBOR sanitary centrifugal pump is single stage,
single suction and open-type impeller. The pump shell and impeller
are elaborately designed to reduce the resistance and thoroughly
eliminate the dead corner of sanitation. Thanks to its unique
structure, the flow speed of liquid in the pump is enhanced, so
that the integral performance of the pump is improved. It is
provided with excellent sanitary performance, so it is easy to be
cleaned.
It can meet the requirements for sanitation and soft treatment to
products and has the chemical corrosion resistance.
Motor
1. The motor is designed and manufactured according to
international standards International Electrotechnical Commission
IEC34, IEC72
British Standard BS4999-5000
Australian Standard ASI 359-2
German Standard DIN 42673
Conforming to"CE"mark requirements
2. The motor conforms to the following standards GB 755-87
GB10069-88
Q/JBQS 28-20003. Excellent electric performance Low noise, low
vibration Protection grade of high performance The standard
protection grade of the motor is designed as lp54, IP55
According to user requirements, higher protection grade can be
offered.
Suitable for use with double frequency and wide voltage.
Standard design
The GKH sanitary centrifugal pump is composed of motor, pump shaft,
mechanical clamping jacket, sanitary mechanical seal, connection
support, rear plate cover, impeller, pump shell, etc. The GKH
sanitary centrifugal pump has large internal round chamfer and
cleaning type seal. The GKH sanitary centrifugal pump
speciallydesigned for CIP has the stainless steel protection cover
used for protecting the motor, and the equipment is supported by
four adjustable feet.
Shaft seal
The GKH sanitary centrifugal pump is provided with a set of
externally mounted single end mechanical seal or water injection
mechanical seal. The static ring of the mechanical seal is made
ofstainless seal, silicon carbide or tungsten alloy. The dynamic
ring is made of stainless seal, carbon, graphite or tungsten alloy.
The seal ring of the water injection type seal is a durable lip
seal. The series of pump products can also be equipped with the
double end mechanical seal.
Technical parameters
Maximum inlet pressure:0.5MPa Temperature range:-10℃+140℃(EPDM)
Noise level(at 1m):60-85dB(A)
Washable seal Hydraulic pressure: maximum 0.1MPa Water
volume:0.25-0.5L/min Double end seal Hydraulic pressuremaximum
0.1MPa Water volume:0.25-0.5L/min
