1.5 liter pet water bottle filling machine with completely
automatic control
Features of Pure Water Filling Line:
Pure water filling line with advanced gravity filling technology
from Germany and Italy is applied on the machine, which assure
quick filling and high accuracy of liquid level control.
Magnetic torque is applied on bottle screw-capping. Constant screw
capping power can be adjustable stepless and therefore will not
hurt the bottles at all.
Horizontal swirl cap sorting device is applied to avoid damaging
caps. No caps, no capping; No caps, feeding system run
automatically.
Human-machine interface touch-screen and PLC control system are
adopted on the machine. Liquid level in the tank is controlled
automatically. No bottles, no filling, no capping.
All parts of pure water filling line connected with water are made
of food grade stainless steel.
Technical Parameters:
| Model | CGF4-4-1 | CGF6-6-1 | CGF8-8-4 | CGF10-10-5 | CGF16-16-4 | CGF25-25-5 | CGF32-32-6 |
Capacity (bph/5L) | 500 | 750 | 1000 | 1200 | 2000 | 3000 | 4000 |
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded
structure.
The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of SUS304
stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp
is capable of cleaning any part of bottle inner wall, and also
saves rinsing water.
All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine
frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to
process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed
support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism which have a photocell switch to
stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of
caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang
