Big Bottled mineral water filter plants with automatic control for
water factory
Characteristics:
1.Using the wind sent access and move wheel in the bottle directly
connected technology;Canceled screw and conveyor chains,this enable
the change the bottle-shaped become easier.
2.Bottles transmission adopt clip bottleneck
technology,bottle-shaped transform not need to adjust the equipment
level,only change relater the curved plate,wheel and nylon parts is
enough.
3.The specially designed stainless steel bottle washing machine
clip is solid and durable,no touch with the screw location of
bottle mouth to avoid secondary pollution.
4.High-speed large gravity flow valve filling valve,filling
fast,filling accurate and no liquid lose.
5.Spiraling decline when output bottle,transform bottle shape shape
no need to adjust the height of conveyor chains.
6.Host adopt advanced PLC automatic control technology,the key
electrical components from famous company such as Japan,France
Schneider
Technical Parameters:
| Model | CGF4-4-1 | CGF6-6-1 | CGF8-8-4 | CGF10-10-5 | CGF16-16-4 | CGF25-25-5 | CGF32-32-6 |
Capacity (bph/5L) | 500 | 750 | 1000 | 1200 | 2000 | 3000 | 4000 |
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded
structure.
The machine applies unique overturning bottle clamp, which is an
innovation of our company. This bottle clamp grips bottle at neck
position, avoiding bottle mouth thread contamination caused by
rubber gripper block of a traditional bottle clamp. Made of SUS304
stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp
is capable of cleaning any part of bottle inner wall, and also
saves rinsing water.
All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine
frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to
process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed
support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism which have a photocell switch to
stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of
caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang
