Stable Lemon and Juice Flavor Beverage Can Carbonated Drink Filling
Machine
DOWNLOAD VIDEO LIST Video link in youtube.pdf
Video link
Machine description
The machine is mainly used in the beverage filling operations. The
three functions of bottle wash, fill and seal are composed in one
body of the machine. The whole process is automatic. The machine is
used in filling carbonated drink, mineral water and purified water
in bottles made of polyester and plastics. The Machine can also be
used in hot filling if being installed with temperature controlling
device. The handle of the machine can be freely and conveniently
Turned to adjust the machine to fill various types of bottles. The
filling operation is faster and more stable because the micro
pressure filling Operation of the new type is adopted. There the
output and benefit of the machine is higher than the machines of
the same specifications. The advanced OMRON programmed controller
(PLC) is adopted to control the machine to run automatically while
a transducer is used in the bottle -entering chains to Adjust
speeds and coordinated with the transducer of the main machine to
make the operations of moving bottle forward steadily and reliably.
It is Convenient to operate with higher automation because every
part of the machine is inspected to run with photo electricity, On
the bases, the filling Parts of the machine can be changed into
filling methods of lower vacuum. The filling category of lower
vacuum (Z type machine) is applicable in glass Bottles, filling
alcohol, soy and such like materials. The aluminum theft proof cap
and plastic cap can be adopted. The machine is an idea-preferred
equipment for beverage makers
Flat conveyor
1.Stable conveying, using synchronous chasing control between the
conveying belt and
engine, making bottles in good condition in the conveying:
non-falling, non-block, non-jam.
2. Conveying belt is designed by module, component can be
interchanged easily, with compact structure, low noise, easy
assembling and maintaining, good flexibility to combine the
bottle type according to the different capacity.
3. The design of electrical control is advanced and rational, we
can design the control
method , select the electrical control component according to
client's layout, to improve
the conveying stability
4. Set the switch according to conveying system layout or
customers' reasonable requirement,
for the convenience of operation.
5. Belt lubricating system is equipped
6.Main part all using ANSI304
7. Fringe board is using the U.S. Rexnord technology to produce
Specification
1.Conveyor Height:1050mm
2.Side panel: 304 stainless steel sheet, thickness is 2mm
3.Power: HANGZHOU JIE Brand 0.75KW
4.Supporting leg: 304 stainless steel
5.Trunking and cover: 304 stainless steel
6.Lubricant water conservation tank: 304 stainless steel
7.Chain plate: Domestic high-quality plastic chain
plate,polyoxymethylene (POM)
8.Bearing housing: 304 stainless steel cage
Material for each part
| Descriptipn | Material | Brand |
| Plate | Stainless steel 304 | ZPSS |
| Bearing | Stainless steel 304 | Self made |
| Bushed | Engineering plastic | IGUS |
| Washing clamps | Stainless steel 304 | Self design |
| Filling Valve | Stainless steel 304 | Nanjing |
| Machine table | Carbon steel | Daming |
Basic data
| Containers and specifications |
Project Name:
Complete full automatic 3-in-1 glass bottle beer filling machine
400-25000BPH | Carbonated water
/ Soft Drink / Beer |
| Material | Shape | Filling volume | Filling level(mm) | Cap type |
| Glass Bottle | Round Bottle | 200-2000ml | Distance from bottle neck
According request | Screw cap
Crown cap |
| Adjustable specifications of the bottle type | (Middle Mould Base)Bottle diameter Φ50~Φ85mm Bottle Height
105~300mm |
| Customers need to buy additional change-over parts for the
different bottles.
If using square bottles, then bottle separating system will be
added. |
Carbonated Drink
Preparation | Syrup melter/ Mixing machine/Filter/Co2 Filter/CO2 Mixer ..... |
Machine Filling
Processing | Washing bottle --- CO2 into bottle --- Vacuum --- CO2 --- Vacuum
--- Filling Beer --- Capping |
| Container Label & Control Mode | Packaging system | Palletizing system |
Hot Melt Roll-Fed
PVC Shrink Label
Full Label/ Half Label
Manual / Automatic | Packing system | Min, Spec. | Manual
Low position gantry palletizer
Robot Palletizer
High position gantry palletizer
Single Arm Palletizer
Manual Palletizer |
| Manual
Film shrinker
Wrap Around packer
Robert Packing Machine | 1*2
2*3
3*4
4*6
3*5 | |
| User Ambient Conditions | Temperature:10~40ºC;Humidity:No dew |
| User Electrical Supply Specification | Voltage:380V±5%, 3phase; Frequency:50HZ±1% |
Auxiliary machines for filling machine
1, Cap elevator
2, Cap sorting machine
3, Anti-foaming system
4, Bottled juice pasteurizer tunnel
6, Cleaning room
7, Bottle washing tunnel
8, Bottle dryer
9, Stick labeling machine
10, Date printer
11, Final package machine
Electric configurations
| PLC / Touch screen | Siemens / Mitsubishi |
| Contactor / Relay | Schneider |
| Power | Schneider |
| Light sensor | Autonics / Omron |
| Motor | ABB / Siemens / Domestic brand |
| Pump | cCNP pump which is one of the best in China |
Another machienn types
| model | DCGF
14-12- 1 4 | DCGF
18-18-6 | DCGF
24-24-8 | DCGF
32-32-10 | DCGF
40-40-12 | DCGF
50-50-15 | DCGF
60-60-15 |
Production capacity
(500ml/b/h) | 2000- 3000 | 3000- 5000 | 5000- 7000 | 7000- 10000 | 10000- 15000 | 16000- 20000 | 20000- 24000 |
| Filling precision | ≤+5mm(liquid level) |
| Filling pressur (Mpa) | ≤0.4 |
| PET bottle specification (mm) | bottle diameter:φ50-φ100;height:150-310 |
| Suitable cap shape | plastic screw cap |
| Total power (kw) | 4.4 | 5.2 | 6.2 | 6.2 | 7.5 | 11 | 15 |
| Weight (kw) | 2500 | 3500 | 4500 | 6000 | 7200 | 10000 | 115000 |
| Overall dimensions (mm) | 2250*1650
*2250 | 2600*1965
*2250 | 2980*2200
*2250 | 3880*2200
*2250 | 4000*2250
*2500 | 5500*3500
*2500 | 6500*5500
*2550
|
Shipping issue
- Most of the shipping are transported by sea;
- We will help to pack the machine by standard export wooden case;
- We will help to book the shipping date;
- We will help to ship the machine to the port warehouse;
- We will help to make the clearance of goods in domestic;
- We will help to send you the clearance documents;
- We will help to track the machine where it is now;
Contact information
CLICK HERE FOR INQUIRY
Contact person: Vickie Sun
MOB (whatsapp/wechat): 0086 13584426100
Skype: vickiesunqiu
Email: sunpiu2012@gmail.com
YOUTUBE VIDEO
FACEBOOK
Detailed photo for ref
