430FSS Core Tube / Core / Plugnut Repair Kits for ASCO 2 / 2 Pulse
Valve SCG353A047 SCG353A051
Non-magnetic core tubes are used to isolate the fluid from the
coil. The core tube encloses the plugnut, the core spring, and the
core. The coil slips over the core tube; a retaining clip engages
the depression near the closed end of the core tube and holds the
coil on the core tube.
The core or plunger is the magnetic component that moves when the
solenoid is energized. The core is coaxial with the solenoid. The
core's movement will make or break the seals that control the
movement of the fluid. When the coil is not energized, springs will
hold the core in its normal position.
The plugnut is also coaxial.
The core tube contains and guides the core. It also retains the
plugnut and may seal the fluid. To optimize the movement of the
core, the core tube needs to be nonmagnetic. If the core tube were
magnetic, then it would offer a shunt path for the field lines. In
some designs, the core tube is an enclosed metal shell produced by
deep drawing. Such a design simplifies the sealing problems because
the fluid cannot escape from the enclosure, but the design also
increases the magnetic path resistance because the magnetic path
must traverse the thickness of the core tube twice: once near the
plugnut and once near the core. In some other designs, the core
tube is not closed but rather an open tube that slips over one end
of the plugnut. To retain the plugnut, the tube might be crimped to
the plugnut. An O-ring seal between the tube and the plugnut will
prevent the fluid from escaping.
The solenoid coil consists of many turns of copper wire that
surround the core tube and induce the movement of the core. The
coil is often encapsulated in epoxy. The coil also has an iron
frame that provides a low magnetic path resistance.
Illustration of positions that Core tube , core, plugnut and spring
installed at solenoid valve or pulse valve:
Applications of core tube BAPC214041405, used as repair kits for
ASCO pulse valve core below:
| G- Threadedpipe joint |
| 1 | SCG353A047 | 1 1/2 |
| 2 | SCG353050 | 2 |
| 3 | SCG353051 | 2 1/2 |
| 4 | SCG353060 | 3 |
| Ø-Quick coupling |
| 1 | SCG353A065 | 1 1/2 |
Overall dimensions of Core Tube / Core and Plugnut for ASCO pulse
valve:
Solenoid subassembly:
Retaining clip (a.k.a. coil clip)
Solenoid coil (with magnetic return path)
Core tube (a.k.a. armature tube, plunger tube, solenoid valve tube,
sleeve, guide assembly)
Plugnut (a.k.a. fixed core)
Shading coil (a.k.a. shading ring)
Core spring (a.k.a. counter spring)
Core (a.k.a. plunger, armature)
Solenoid Valve Common Uses:
Solenoid valves are used in fluid power pneumatic and hydraulic
systems, to control cylinders, fluid power motors or larger
industrial valves. Automatic irrigation sprinkler systems also use
solenoid valves with an automatic controller. Domestic washing
machines and dishwashers use solenoid valves to control water entry
into the machine. They are also often used in paintball gun
triggers to actuate the CO2 hammer valve. Solenoid valves are
usually referred to simply as "solenoids."
Solenoid valves can be used for a wide array of industrial
applications, including general on-off control, calibration and
test stands, pilot plant control loops, process control systems,
and various original equipment manufacturer applications.
More Core Tube / Core and Plugnut we have, welcome to send us any
questions, also we can produce as customized:
Our working shop of Core Tube, Armature Tube, Plunger Tube,
Solenoid Valve Tube, Sleeve, Guide Assembly, Core, Plugnut, Fixed
core:
