Auto PET Bottle Fruit Juice Filling Plant Juice Hot Filling Machine
Introduction
3-In-1 plastic bottle hot juice filling machine with washing,
filling and capping. It is innovated and designed in the
requirement of non-carbonated energy drinks, juice, tea, on the
bases of introducing, digesting and absorbing advanced technology
from Germany and Italy.
Feature
1. Bottle in-feed
Bottle infeed by combination of infeed starwheels.
Equipped with bottle jam protection device.
2. Bottle washing machine
Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Bottle washing machine adopts China-Beverage original overturn and
double-opened bottle clip. Bottle clip lock the bottleneck, the
material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive
droplet with 15° angle ensures to wash all side of the bottle, and
can save the water.
3. Transfer starwheel
Made of stainless steel of superior quality.
Equipped with bottle jam protection device.
4. Hot filling machine
Hot filling machine is reasonable and hygiene dead angle, the run
of equipment is stable, it can control the material from the
bottleneck, the control accuracy is within ±2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after
filling valve contact the bottleneck ,it start to fill.
The juice or other hot beverage can be backflow by return tank to
control filling temperature.
5. Capping machine
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. our
screw capping has following feature.
1) Import of advanced technology of screw capping, improve the
stability and reliability of the screw capping machine. The
magnetic torque is used for screw capping. the power of screw
capping can be adjusted without steps. The power of the screw
capping can also be fixed, and the caps will not be damaged, the
capping is reliable.
2) In the screw capping part. it installed photoelectrical control
, when it has no cap ,or the cap is bad, the machine will stop
automatically.
Output bottle star wheel part
Nylon wheel and conveyor belt cooperate output the bottle.
Output bottle conveyor belt part
Conveyor motor use frequency control of motor speed, which keep
pace with the 3-1 machine. Prevent overturned bottle
6. Rack part
Rack is welded by high quality carbon steel, Antirust processing
and spray surface. The surface is covered by the SUS304.
Electronic control system part
The electronic components like PLC and transducer are from
Mitsubishi, Omron, etc., The pneumatic devices are also from
international famous brand.
Main configuration
Touch screen: THINGET
PLC program controller: Mitsubishi
Inverter: Mitsubishi
Photoelectrical controller: Autonics
Proximity switch: Autonics
Other electrical components: Schneider
Pneumatic component: Airtac
Water pump: Nanfang
Main motor: Siemens
Bearing: Harbin
Technical parameters
| Number of Filling Valves | 12,16,24, 32, 40, 50, 60, 72, |
| Filling Speed | 2, 000-30, 000BPH (500ml) |
| Type of Bottles | PET Bottles of various shapes |
| Bottle Height | 150-320(mm) |
| Bottle Diameter | φ 50-110(mm) |
| Filling Temperature | Hot Filling |
| Filling Principle | Gravity Filling |
| Filling Product | Apple juice, orange juice, flavored milk, tea drinks, energy
drinks, vitamin drinks and etc. |
FAQ
1) Can your factory provide the complete plant from A to Z?
A: Yes, we can provide the complete plant, from water treatment
plant, to filling packing plant.
2) How can I know the machinery quality before I order?
A: Frist, we will invite you visiting our factory to check the
machines quality, and show the machines running for you in our
factory.
3) What certificates you can provide?
A: Our factory provide the CE, SGS, ISO, and accroding to some
countries, we also can provide the Pvoc, Coc, Soncap...ect
4) Can your factory make the bottle drawing, workshop layout, and
labels for us?
A: We can help customers design their own bottle shape, workshop
layout and label drawings, these jobs are free charge.
(Workshop need customer to provide the size of factory)
5) Installation and Training Time
A: We have professional engineer for oversea installaion and
training, they can speak English, and have much experience oversea
work.
If you have any interest in our machines, welcome to inquiry.
