1. Take in device:
Used to take pressure in film, according to cylinder controlled by
fluctuation, operation convenience. Taking in speed can be
controlled by manual, it can be ascension. Take device adopts
conveyor, the transmission system adopts frequency governor to
control.
2. Soak device:
Equipped with triplet, manual rotary valve and pressure cylinder,
adjust pressed roll according to cylinder control through the
manual rotary valve, in order to Make discontinuous film compressed
together and the film continuous a slice.
3. Leaching plasma device:
Function: Take over the film conveying equipment undertakes
immersing, and carry on isolation agent. Equipped with cooling
water pipe, through the cooling water source, continuous cooling
liquid isolation, in order to control the temperature.
4. Take up device:
This device through the conveyor belt with isolation liquid film
will be conveyed to the air cooling section gripping.
5. Wind cooling device:
Constitute: It is made of frame, cooling fans, hook rail and hang
lever conveyor. Cooling fan selection adopts 20 axial fan, satisfy
the requirements of film cooling; Hang lever are installed on the
taper pin, film in hang lever.
6. Conveying laminated device:
Will the film into laminated measures, continuous fold in film
seat.
7. Electrical control system:
(1) All the wires controlled by PLC, it easy for operation,
reliable quality.
(2) The speed of production line can be through the inverter
adjustment, make the film cooling line speed and host match.
(3) Fan control by the group control each motor are over-current
protection circuit breaker, when a fault fan produced when the
output signal of the fan, fault in all units and stop hair drier,
just deal with a fault can be fan.
