IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Name: IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
Brand: Sinuo
Price: 1 USD

Ask Lasest Price
Brand Name :	Sinuo
Model Number :	SN2210-2
Certification :	Calibration Certificate (Cost Additional)
Price :	Negotiable
Payment Terms :	L/C, T/T
Supply Ability :	60 Sets Per Month
Delivery Time :	3~5 Days

Add to Cart

Product Details
Company Profile

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Product information:

The test finger probe B is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for household and similar electrical appliances’ enclosure against electric shock test, an essential lab tool for the quality inspection departments and research institutions to detect relevant household appliances product safety performance.

Techincal Parameters:

Parameters /Model	SN2210-2	SN2210-2A (Optional)	SN2210-2B (Optional)	SN2210-2T (Optional)
Applied Standard	IEC 62368-1 figure V.2	IEC60335-1	IEC60335-2-14	IEC60529
Name	Standard test finger	Circular baffle test finger	Large baffle test finger	Standard test finger with force
1	30±0.2	30±0.2	30±0.2	30±0.2
2	60±0.2	60±0.2	60±0.2	60±0.2
3	80±0.2	80±0.2	100±0.2	80±0.2
4	180±0.2	180±0.2	----	180±0.2
5	R2±0.05	R2±0.05	R2±0.05	R2±0.05
6	S4±0.05	S4±0.05	S4±0.05	S4±0.05
7	37^o 0 -10’	37^o 0 -10’	37^o 0 -10’	37^o 0 -10’
8	14 ^o 0 -10’	14 ^o 0 -10’	14 ^o 0 -10’	14 ^o 0 -10’
9	Ф12 0 -0.05	Ф12 0 -0.05	Ф12 0 -0.05	Ф12 0 -0.05
10	Ф50	Ф50	----	Ф50
11	20±0.2	----	----	20±0.2
12	Ф75±0.2	Ф75±0.2	Ф125±0.2	Ф75±0.2
13	5±0.5	5±0.5	----	5±0.5
14	----	----	----	10-30N force

Details:

1. The dimensions are made according to IEC 61032 figure 2.

2. The finger probe material: stainless steel.

3. The baffle and handle material: nylon.

4. The end of the handle with a M6 thread hole, which is used for connecting with a force gauge to achieve required force value.

5. It is equipped with a cable and an alligator clip, which is used for connecting with anti-shock probe experiment device to verify whether the appliance’s enclosure against electric shock.

Operation Steps:

1. Please refer to relative standard requirements, take IEC 60335-1 clause 8.1.1 as an example: Test probe B of IEC 61032 is applied with a force not exceeding 1N, the appliance being in every possible position except that appliance normally used on the floor and having a mass exceeding 40 kg are not tilted. Through openings, the test probe is applied to any depth that the prone will permit and is rotated or angled before, during and after insertion to any position. If the opening does not allow the entry of the probe, the force on the probe in the straight position is increased to 20 N. If the probe then enters the opening, the test is repeated with the probe in the angled position. It shall not be possible to touch live parts or live parts protected only by lacquer, enamel, ordinary paper, cotton, oxide film, beads, or sealing compound except self-hardening resins, with the probe.

2. If the test requires applying the test probe B with specific force, it needs to work with a force gauge. Please screw the force gauge connector into the M6 thread hole on the end of the handle.

3. For verifying whether LIVE PARTS touched, it requires working with an anti-shock probe experiment device: it is connected to the anti-shock probe experiment device (40V-50V), then operator processes the test according to the relative standard, the buzzer ringing means electric shock prompted.

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

Figure 2 Jointed Standard Test Probe

IEC 61032 Test Probe

IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment

You May Like

75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116

IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation Test Apparatus

IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank

SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B But Having A Ф50mm Circular Stop Face

IEC 60335-2-9 Electrical Appliance Testing Equipment Toasters Abnormal Operation 500 Times Endurance Test


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!