This machine is mainly used for the uniform mixing of powder and
granular materials in the pharmaceutical, chemical, electronic, and
food industries.
This machine is mainly composed of mixing barrel, frame,
transmission system, electrical system and other parts. It uses two
asymmetric barrels and adopts gravity mixing. The materials are
continuously gathered and dispersed in the barrel, generally after
10~ It takes about 30 minutes to mix, so that two or more powder
and granular materials are fully mixed and uniform, especially
suitable
When the proportion of two or more materials is combined, the
mixing uniformity can reach more than 99%. The inner and outer
walls of the mixing barrel are precisely polished, and the surface
is smooth, flat, without dead ends, and easy to clean. During the
working process of the transmission system, there is no jitter, no
noise, easy maintenance, accurate and sensitive electrical control,
and stainless steel butterfly valve discharge, no leakage and no
dust. The machine is unique in design, beautiful in appearance and
versatile in use. It is an ideal equipment for mixing materials
1. The mixing barrel is a W-shaped double-tapered cylinder, and the
material is 304-2B high-quality stainless steel plate ring formed
by round and close welding, which is more conducive to cleaning the
barrel after the material is mixed. Both the inner and outer walls
are precisely polished and polished, with smooth surface, no dead
ends, thorough discharge, and easy cleaning; 2. The transmission
system is composed of motor, reducer, sprocket, bearing,
transmission shaft and other parts. There is no noise in the
working process, smooth operation, no jitter, and no eccentricity;
5. The feed port is a DN350 manhole, and the seal is made of edible
silicon rubber sealing strip, which is pollution-free and easy to
operate
3. The frame of the mixer is made of channel steel, which is welded
firmly, and the outer frame of the frame is made of 304-2Bδ1.5mm
stainless steel. The surface is flat, without scratches, and no
welding traces. The side of the rotating bracket electrical control
is a movable door for easy maintenance;
4. The discharge port of the barrel is installed with a DN150
stainless steel sealing butterfly valve, which has good sealing
effect and convenient operation;
Feeding:
