CNOMO Pneumatic Solenoid Valve 9mm Hole Diameter Magnetic Bobine
When using the solenoid valve coil, it is necessary to ensure that
the coil product is very suitable for use, so that the entire
solenoid valve device can exhibit a very optimized application
effect. In order to purchase the coil products that are suitable
for use, you need to ensure that the coils you purchase are
suitable for the following aspects:
1. Appropriate specifications: When using the solenoid coil, you need to install it to the
relevant part of the solenoid valve before you can start using it
normally. And in order to complete the installation work of the
coil normally, the coil must have a very suitable size in each
part, and the corresponding size must have a corresponding product
specification. Therefore, such a coil suitable for the
specification is sufficient for everyone.
2. Appropriate voltage: When using solenoid valve equipment, the actual application
conditions can meet different requirements in terms of voltage.
Therefore, the solenoid valve coil that meets the actual voltage
conditions in terms of applicable voltage is required. From this
point of view, such a coil that is very suitable in terms of
voltage is very suitable for everyone.
Technical parameter of FESTO Type 8029144 VACN-N-A1-1 Pilot Valve
Solenoid coils:
| Model No. | BB09030027 |
| Normal voltage | DC12V/DC24V/AC110V/AC220V; or customized |
| Normal power | DC: 6W AC: 10VA |
| Insulation class | H, F |
| Connection type | DIN43650A |
| Application | FESCO MDH-3/2 119601 Pilot Valve Automatic Control |
| Weight | 97.5 g |
| Hole size | 9 mm |
| Height | 30 mm |
Main dimension of AC220V/24VDC 9 diameter MD-2-24VDC-PA solenoid
valve coils:
Production of 8029134 VACN-N-A1-16B/8029135 VACN-N-A1-3A
Electromagnetic Valve Coils:
Application of 8029144 VACN-N-A1-1 MD-2-24VDC-PA Pneumatic Solenoid
Coils:
Take care to avoid foreign matter entering the inside of the
solenoid coils:
Although the solenoid valve coil is a component product that looks
very simple in structure and is very convenient to use at the same
time, as far as its application is concerned, it is still necessary
for everyone to pay attention to avoid foreign matter entering the
inside of the coil, so as to better protect the coil. Good
application effects are presented.
The reason why everyone is required to use the solenoid valve coil,
pay attention to avoid foreign matter entering the inside of the
coil, because there is a gap between the coil and the internal
solenoid valve structure part, so there is foreign matter such as
some particles of impurities entering. may. Once too much
impurities enter the inside of the coil, it should first come to
the core to pick up the effect, and then make the coil in the
application, because the current is too large, and the phenomenon
of abnormal heating. In the case of abnormal long-term heating of
the coil, the life of the coil itself will have a great adverse
effect, which will make it necessary to replace the new coil in a
short period of time to ensure the normal operation of the solenoid
valve. use.
Therefore, in order to ensure that the solenoid valve coil has a
normal use state, and to ensure that it can achieve a relatively
long-term application, it is necessary to take care to avoid
foreign matter entering the inside of the coil when using the coil.
Welcome to your inquiry!
