EVI 7/10 Coffee Machine Steam Iron Parts Solenoid Valve Coil
1. The aperture of EVI 7/10 solenoid valve coil: the size of the
solenoid valve coil, the most important aspect is the aperture of
the coil, generally speaking, is the thickness of the wire that can
pass inside the coil. Therefore, the most basic of such coils with
precise dimensions is to have a very suitable size in terms of
aperture.
2. Height of EVI 7/10 pneumatic magnetic coil: different sizes of
solenoid valve coils will have different sizes, and their different
sizes are mainly reflected in the aperture and height of the coil.
Therefore, in addition to the accuracy of the aperture, such a coil
of precise size requires a very precise size in terms of the height
of the coil.
It must be very precise in these two aspects, the solenoid valve
coil will have a precise size, which will be more suitable for
everyone's application.
Dimension of BB10029502 Solenoid Valve Coil :
Technical Data:
Model | |
Hole size | |
Height | |
Width | |
Voltages | AC220V, AC110V, AC24V, DC24V DC12V |
Power | 4VA, 5.5VA, 8.5VA, 20VA, 3W, 4.8W, 6W |
Insulation class | |
Connection Type | |
Application examples | Solenoid Valve, Pneumatic Valve |
Solenoid Coil Production Line:
Attention:
1. This air suspension compressor pump solenoid coil is made of
high quality components.
2. Replaces the original air compressor solenoid coil of your car
and equal the original quality.
3. Please double confirm the compatibility as well as the OEM
number before purchasing.
4. Instruction is not included. Professional installation is
recommended.
Steps and methods for properly installing a solenoid valve coil:
1. Check if the solenoid valve and the selected parameters are the
same, such as differential pressure, etc. If the error occurs, the
solenoid valve coil will be burned out. Voltage fluctuations should
be within the normal range and meet the rated voltage.
2. Before connecting the pipeline, flush the pipeline and remove
the residual dirt in the pipeline. If there are residual stains, it
will affect the normal use of the solenoid valve. To prevent this,
a filter should be installed in the pipeline.
3. Install the solenoid valve coil of the solenoid valve vertically
on the horizontal and ground pipes. If there is a special
situation, it cannot be installed vertically. The appropriate
solenoid valve should be ordered in advance, otherwise the solenoid
valve will not work properly.
4. When installing, add a safety process and install a manual
cutting valve to facilitate maintenance in case of failure.
5. Pay attention to the direction when installing, can not be
reversed, installed in the direction indicated on the package, and
can be reversed in some special cases such as vacuum.
6. If the water may be damaged by the medium, you must take
appropriate protective measures or choose a solenoid valve with a
waterproof hammer function.
7. The solenoid valve cannot be energized all the time, otherwise
it will reduce its life. Note that normally open, normally closed
solenoid valves cannot be used with care.
Product Features:
1. Using high quality wire which has UL approved; 2. Using high
quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
