10G CWDM SFP+ 1270~1310nm 10km DOM LC SMF Transceiver Module for
Extreme Switches
Product Features
● Supports 9.95 to 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1270nm~1330nm DFB transmitter, PIN photo-detector
● Applicable for 10km SMF connection
● Low power consumption, < 1.2W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature:
Commerical:0 to 70 °C Industrial:-40 to 85 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Ethernet
● Other optical links
Product Descriptions
Olinkcom’ OLSCxx1XL-C(I)D10 CWDM DFB 10Gbps SFP+ transceiver is
designed to transmit and receive optical data over single mode
optical fiber for link length 10km. This transceiver consists of
two sections: The transmitter section incorporates a CWDM DFB
laser. And the receiver section consists of a PIN photodiode
integrated with a TIA. All modules satisfy class I laser safety
requirements. Digital diagnostics functions are available via a
2-wire serial interface, as specified in SFF-8472, which allows
real-time access to device operating parameters such as transceiver
temperature, laser bias current, transmitted optical power,
received optical power and transceiver supply voltage.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | λ-7.5nm | λ | λ+7.5nm | nm | 1 |
| Ave. output power (Enabled) | PAVE | -3 | | +6 | dBm | 2 |
| Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
| Extinction Ratio | ER | 3 | | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
| Dispersion penalty | TDP | | | 2.5 | dB | |
| Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | λ | 1260 | | 1620 | nm | |
| Receiver Sensitivity | PSEN | | | -13 | dBm | 3 |
| Overload | PAVE | | | +0.5 | dBm | |
| Receiver Reflectance | Rrx | | | -12 | dB | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -16 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | 4 | dB | |
Notes:
1.The wavelength λ =1270nm~1330nm, Total 18 wavelengths,20nm
spacing
2. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
3.Under the ER worst =5, measured at 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Other Details:
a.Quality warranty:3years
b.Compatibility:Juniper,Cisco,FA,Ciena,D-link,MikroTik,ect,and
support customized.
High-Performance Features offers Cost-Effective and Reliable
Transmission
Low power consumption and low latency allow your network devices to
work efficiently, and the DOM function supports real-time
monitoring for transceiver status.
