LC Duplex 10 Gbe SFP+ Sr Fiber Transceiver 850nm 300m Cisco
Compatible
10GBASE-SR SFP+ 850nm 300m DOM LC MMF Transceiver Module Compatible
Cisco SFP-10G-SR
Product Descriptions
This transceiver product is used in 10-Gigabit Ethernet over
MultiMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE
802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for
high perform-ance and cost effective to supply customers the best
solutions for telecommunication and datacom.
Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 810 | 850 | 880 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | | 0 | dBm | 1 |
| Extinction Ratio | ER | 3.5 | | | dB | |
| RMS spectral width | Δλ | | | 0.85 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | 2 |
| Dispersion penalty | TDP | | | 2 | dB | |
| Output Optical Eye | Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength | | 840 | 850 | 860 | nm | |
| Receiver Sensitivity(ER=4.5) | PSEN1 | | | -11.1 | dBm | 3 |
| Overload | PAVE | | | 0.5 | dBm | |
| LOS Assert | Pa | -30 | | | dBm | |
| LOS De-assert | Pd | | | -12 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
2. 20%~80%
3. Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Product Highlights
● Supports up to 11.3Gb/s bit rates
● Duplex LC connector
● 850nm VCSEL transmitter, PIN photo-detector
● Up to 300m on 50/125um MMF(2000MHZ.KM)
● Hot pluggable SFP+ footprint
● Low power consumption, < 1W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae
● Electrical interface compliant to SFF-8431
● Operating case temperature: Commerical:0~70°C
Applications
● 10G Base-SR/SW at 10.3125G and 10G Fiber Channel
● Other optical links
