Computer Keystroke Tester / Keyboard Key Tester Max. 120 Keys 600
times/min
Model: RS-8330B2
Purpose:
This tester is used for life time test of computer keyboard,
note-book keyboard, other knobs and switches, can test many parts
together at the same time (Every parts can be tested at many
different places) Can test Max.120 keys for keyboard.
Features:
Highest speed is 600times/min (10times/sec.)
Can test top to120 keys for one time, which can satisfy full
inspection for keyboard quality control.
Use the AC speed adjustable motor for the driving, with low noise
and high durability.
To use the weight to click the keys, the clicking force is
adjustable from 100~200gf, the clicking force is precise.
The main structure is use the high hardness steel for the
supporting, and us the NSK bearing for the transmission, can make
sure the durability of the tester.
The testing table is using alum. With anodic oxidation, that can
make sure the good looking, there are enough holes for the keyboard
fixture installation.
Because of using the special transmission design, the max clicking
speed can be 360cycles / Min, that can raise the testing efficiency
to save the testing time.
There are 108pcs weights for option, can meet the full checking for
the keyboards (the standard attached weight quantity is 10pcs)
To use the LCD counter, can set the testing cycles from
0~99,999,999, and it has the memory function which can make sure it
will not affected by accident shut-off of power , when reach the
set cycles, the tester will automatically stop.
To use the AUTONIS rotation speed counter, can display the testing
speed. Use the sliding block design, can move the fixture forth and
back, left and right, can test any key.
Specification:
| Model | RS-8330B2 |
| Clamp area (WxD) | 400x300mm |
| Up and down range of testing table | 0~100mm (Hand moving) |
| Test load | base load 80gf, 10gf, 20gf, 30gf, 50gf can be added accordingly |
| Test speed | 36～240 times/min or 120~360 times/min |
| Test cycle | 0~99,999,999times (Adjustable) |
| Dimension (WxDxH) | 530x460x980mm |
| Weight | About 120 kg |
| Power Supply | AC220V 50Hz 5A or specified by user |
