Electrical Signal Controlled DMF Series pulse solenoid valve B DMF
- Y - 76S for Dust Remove
Our range of Pulse Valves are fabricated from high grade raw
materials. We have made our solenoid operated pulse valves using
state of the manufacturing techniques. With assured functionality
in its operations, our products are widely used by different OEMs
across the world.
Pulse Valves offered finds usage in handing gas instantly once
electrical signal is received and comes designed and developed as
per industry standards. Further, these electromagnetic pulse valves
is controlled through electrical signal that attracts the moving
bar which in turn uncloses balancing hole for quickly releasing
pressure gas in back cavity of diaphragm. Some of its features
include presence of damping hole in diaphragm for damping airflow
in situation where moving bar of armature holds up for balancing;
provide for optimum performance support, can also be custom
configured as per the specific demands of the customers.
B DMF-Y-76S dust bag collector pulse valve working technical
parameter:
| Part No. | BDMF-Y-76S |
| Operating pressure | 0.3--0.8MPa |
| Ambient temperature | -5~55℃ |
| Relative humidity | ＜85% |
| Fluid | Clean air |
| Voltage | AC110V / AC220V / AC24V |
| Diaphragm working life | More than one million cycles |
| Orifice | φ 76mm |
| Connection pipe size | G 3" |
1 Inch B DMF-Y-76S Type Pulse Valve Specification and Unit Net
Weight:
| Part No. | Pipe Size (mm) | Pipe Size (inch) | Diaphragm Qty per Valve | Outlet Connecting Size | Net Weight (kg) | Flow rate |
| BDMF-Y-25 | φ 25 | 1" | 1 | G1" | 0.8 | 26.24/30.62 |
| BDMF-Y-40S | φ 40 | 1 1/2" | 2 | G1 1/2" | 1.2 | 39.41/45.99 |
| BDMF-Y-50S | φ 50 | 2" | 2 | φ 50 | 2.5 | 62.09/72.46 |
| BDMF-Y-62S | φ 62 | 2 1/2" | 2 | φ 62 | 3.0 | 106.58/124.38 |
| BDMF-Y-76S | φ 76 | 3" | 2 | φ 76 | 3.7 | 165.84/193.54 |
| BDMF-Y-90S | φ 90 | 3 1/2" | 2 | φ 90 | 5 | |
| BDMF-Y-102S | φ 102 | 4" | 2 | φ 102 | 5.65 | 268.29/313.09 |
Electromagnetic Pulse Jet Solenoid Valve/ Diaphragm Valve B
MDF-Y-76S Working Principle:
The pulse valve diaphragm is divided into two, gas chamer (Front &
Back), when switching compressed air, compressed air through the
throttle orifice into the gas chamber after at this time of the gas
chamber pressure will diaphragm components.
Close to the valve outlets, pulse valve is in " closed" status.
Pulse injection control instrument signal that the pulse valve bit
back, after the gas room put stomatal open, and the gas chamber
pressure loss after quickly, diaphragm components moved the
compressed air. A valve lose export injection, pulse valve in the "
open " status. Pulse injection control instrument signal
disappears, solenoid pulse valve bit reset, gas after . Room put
stomatal closure, the gas chamber pressure after increase is clingy
valve diaphragm components of outlets, solenoid pulse valve and in
" closed" status.
Structure Instruction of DMF-Y Type Pulse Valve:
Material of Components on Pulse Jet Valve:
| Number | Part Name | Material |
| 1 | Solenoid coil | copper wire |
| 2 | Plunger tube assembly | 430FR |
| 3 | Small common top cap | ADC12 Aluminum |
| 4 | Middle cap | ADC12 Aluminum |
| 5 | Small spring | SS321 |
| 6 | Diaphragm | NBR |
| 7 | Top cover | ADC12 Aluminum |
| 8 | Big spring | SS321 |
| 9 | Fastener | SS304 |
| 10 | Diaphragm | NBR |
| 11 | Valve body | ADC12 Aluminum |
Details of Pulse Jet Valve BDMF-Y-76S Y Type pls check above photo
in display window.
Overall Dimensions of B DMF-Y-76S Pulse Valve:
We also sell kits, such as solenoid coil and armature assembly:
Dust Collector Pulse Valve Application:
Welcome your any question, we will reply at once, pls email to:
brandon.bao@brandopneumatic.com
