In Line Solenoid Pulse Valve SCG353B060 G 3 Inch Port Size 110V AC
220V AC 24V DC
In Line Type Solenoid Pulse Valve Parts List:
1, solenoid base, sub-assembly
2, core assembly with rider ring
core guide and core spring
3, solenoid base gasket
4, pilot bonnet screw
5, solenoid base gasket
6, bleed hole
7, pilot diaphragm assembly
8, main bonnet screw
9, main bonnet
10, pilot exhaust
11, closing spring
12, spring cup
13, main diaphragm assembly
14, body gasket
15, valve body seat
16, pipe gasket
17, flast gasket
Pulse Jet Valve Features:
1, The diaphragm pulse valves are especially designed for dust
collector service applications, combing high flow, long life and
extremely fast opening and closing to produce reliable and
economical operation.
2, The high flow, angle type bodies, springless construction, in
combination with the special diaphragm assemblies give the unique
operating features required for dust collector service
applications.
3, Integral compression fitting for fast, easy, secure installation
4, Built-in silencers reduce noise and prevent foreign particles
from entering the valve
5, The integral operators are provided with epoxy moulded F-class
coils. Various optional waterproof and explosionproof solenoids for
use in potentially explosive atmospheres(gas & dust) according to
Directive ATEX94/9/EC can be mounted on the same basic valve
6, The valves satisfy all relevant EC directives.
Datasheet of Diaphragm Pulse Valve BAY060, which can insted of
SCG353B060
| Model No. | BAY060 |
| Operating pressure | 0.3~0.8MPa |
| Ambient temperature | -5~55℃ |
| Relative humidity | ＜85% |
| Fluid | Clean air |
| Voltage | AC110V / AC220V / DC24V |
| Electric current | 0.46A / 0.23A / 0.8A +-10% |
| Diaphragm life | Over 1 million cycles |
| Diameter | φ 76mm |
| Port size | G 3" |
Pulse Valve Parts Material In Contact With Fluid:
| Body | Alumininum / Stainless Steel 316L |
| Core tube | Stainless steel |
| Core and plugnut | Stainless steel |
| Core spring | Stainless steel |
| Sealing $ disc | NBR (nitrile) |
| Diaphragm | TPE (thermoplastic polyester elastomer) |
| Shading ring | Copper |
| Coil insulation class | F |
| Connector | Spade plug (cable φ 6-10mm) |
| Connector specification | ISO 4400 |
| Electrical safety | IEC 335 |
Pulse jet valve short description:
1, all volatge available, 110v AC, 220v AC, 24v AC, 24v DC
2, made of high quality enamelled wire solenoid coil, imported
magnetic stainless steel 430FR armature assemblies, high grade dia
casting ADC alumininum
3, working pressure 0.3~0.8MPa
4, ambient temperature range: -5~55℃
Diaphragm Pulse Valve Model Specifications:
| Part No. | Pipe Size | Orifice Size | Flow coefficient Kv (m³/h) | Flow coefficient Kv (l/min) | Operating pressure differential (bar) Min | Operating pressure differential (bar) Max |
| BAZ043 | 3/4" | 25 | 14 | 233 | 0.3 | 8.5 |
| BAZJ043 | 3/4" | 25 | 14 | 233 | 0.3 | 8.5 |
| BAZ044 | 1" | 25 | 23 | 283 | 0.3 | 8.5 |
| BAZJ044 | 1" | 25 | 23 | 283 | 0.3 | 8.5 |
| BAZ047 | 1.5" | 52 | 46 | 768 | 0.3 | 8.5 |
| BAZ050 | 2" | 66 | 77 | 1290 | 0.35 | 8.5 |
| BAZ051 | 2.5" | 66 | 92 | 1540 | 0.35 | 8.5 |
| BAY060 | 3" | 72 | 170 | 2833 | 1 | 6 |
Details of pulse valve BAZ060 and overall dimensions pls check
above window photo.
We also sell solenoid coil and armature assmebly and diaphragm as
kits for pulse valve:
Welcome your any enquiry, pls send your question to email:
brandon.bao@brandopneumatic.com
