CSG 1000 Dehumidifying Dryer
Product Description
CSG 1000 is a fully automatic drying system with zeolite desiccant
beds, which Can be used with Hopper Bank Series and multi-hopper
systems. It can adapt and automatically control operating
parameters based on type and quantity of polymer.Up to 40% energy
saving in comparison with traditional dryers.
Advantages
1.Ease of maintenance with access process, regeneration, and air
filters.
2.Self-adaptive PID temperature control from 60℃ to 300℃.
3.No use of cooling water.
4.No moving or rotating internal parts.
5.No need of manual control, Full auto-adaptive operation.
6.On-board heating unit on hopper.
7.Diagnostic functions,Dewpoint, heater, and temperature alarm.
8.Visual and audible alarms available.
9.Anti-stress function protecting polymers against overheating.
10.Sturdy, well proven design for extended operational life.
11.Visual and audible alarms available.
12.Automatic dew point control system: not switch to new desiccant
bed before the dew point gets -30°C.
Feature
1. Microprocessor is used for accurate temperature control.
2. Hot air down-blowing design ensures even distribution of hot air
to maintain a steady temperature in the
hopper and increase drying efficiency.
3. Digital P.I.D temperature control with LED display.
4. Innovative design with sleek appearance.
5. Overheat protection to ensure reliable operation.
6. Automatic start/stop timer one week to improve energy saving.
7. Drying hopper and hopper lid can be fully insulated for high
temperature application.
8. Option accessories: euro-hopper suction box, euro-hopper mobile
floor stand, material door magnet,
magnetic base(aluminum or stainless steel), blower inlet filter,
hot air recycling, exhaust air filter.
9. Europeanization design, double-wall with imported thermal
insulation material filled in interlayer,
shorten the heating time and reduce heat loss, therefore saving
energy & high efficient.
10. Standard equipped hot air recyclers.
Air volume control
According to all the data collected by the system, through ABB
frequency converter, we can control fan power and air volume, avoid
risk, improve efficiency and save energy! The traditional drye
cannot control air volume, which wastes energy, and increases the
loss. If air volume is fixed and the fan configuration is not
adjustable, the full amount of air must be configured. when the
output is not high and the raw material is dry, it is not necessary
to have such a large amount of air, so the surplus is wasted.if
using ABB inverter, the air volume can be provided on demand, the
raw material can be dried uniformly, thus, the finished product
quality is guaranteed.
