AC 3 Phase Customized Wire Drawing Machine , 0.8mm-1.6mm Small Wire Drawing Machine

HXE-24DWT Copper small wire drawing machine with annealer

I. Quick Description

HXE-24DWT Copper small wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.

II. Components

III. Main Technical parameters

1. Usage: Copper wire drawing and annealing

2. Inlet diameter: 0.8mm-1.6mm

3. Outlet diameter: 0.1mm-0.6mm

4. Max. mechanical speed: 2000m/min, capacity say 0.2mm, 1400m/min, 23kg per hour.

5. Dies: 24 dies

6. Slip ratio: 15%, Finished capstan slip ratio: 8%

7. Main motor: AC 3 Phase 22KW, Inverter control

8. Annealer motor: AC 3 Phase 3.7KW, Inverter control

9. Take up motor: AC 3 Phase 3.7KW, Inverter control

10. Take up capacity: 50kg for diameter 300mm iron spool (Customize)

11. Spool size: Diameter 300mm/Max (Customize)

12. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm

13. Capstan lubrication: Water pipe spray

14. Traversing: 110W synchronous motor,transmission by timing belts.

15. Brake: 20KG-M Electromagnetic brake

16. Air pressure: 4-6kg/cm2

17. Annealing pulley: Diameter 120mm

18. Annealing volt: DC55V,

19. Annealing current: DC600A ,

20. Annealing motor power: 33KVA

21. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.

22. Machine dimension(L*W*H): 3500mm*1600mm*2500mm, Machine weight:3200kg

23. Power source: 415V, 50Hz(Customized)

IV. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). DC. three-section annealing

(4). Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

V. Lifting the machine, installation, adjustment

5-1.Lifting, there are four lifting rings to lift.

5-2.Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.

5-3.Adjustment, clean all parts, check all the part no loose.

VI. Preparation before working

6-1. Check all parts lubrication conditions,

6-2. Check drawing lubrication oil, cooling water, steam, air pressure.

6-3. After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.