ODD Slot Micro Armature Rotor Winding Machine For 3,5 Slots
WIND-ODD-4
Application:
Micro Motor with 3 slots, 5 slots, even slots covering power tool,
toy,
windshield washer pump, door lock actuator,automotive parts
Advantages:
1. Automatic clamping, automatic winding, automatic
indexing,automatic hooking commutator angle
2. High efficiency,there are 4 working stations, 4 armature can be winded at same time
3. Wire diameter range is 0.08~0.55mm (AWG23 ~ AWG40)
4. 98% yield rate above assured when the slot commutator quality is
good
5. Till now it is the best machine in China for winding slot type
armature
Parameter:
1. Wire diameter: 0.08~0.55mm(AWG23 ~ AWG40)
2. Armature type: Even slots such as 3,5 slots rotor
3. Armature diameter: 8~25mm (0.315'' to 1'')
4. Max armature stack length: 30mm
5.Winding motor speed:0~3000 rpm
6.Max shaft length: 70mm
7.Rated power: ≤1.2kW
8.Air supply pressure: 0.4MPa to 0.8MPa
9.Voltage: AC220V 50/60Hz
10.Working environment temperature: 0℃~45℃
11.Working environment humidity:10%~60%(no condensation)
12.Machine dimension:1100*1200*1300mm
13.Package dimension:1200*1200*1500mm
14.Machine weight:320Kg
15.Package weight:430Kg
Information needed when you send inquiry:
1. Winding diagram include wire diameter
2. Armature lamination drawing
Below is a winding way of 5slots rotor for DC gearmotor
applicaiton:
slot 1 to slot 3
Slot 2 to slot 4
Slot 3 to slot 5
Slot 4 to slot 1
Slot 5 to slot 2
Please click below picture to view video
