Symmetric Speed Rate 1x9 Optical Fiber Transceiver 155M 20KM SC Port 1310nm

FA-TC901S35-20,Symmetric Speed Rate 1x9 Optical Fiber Transceiver 155M 20KM SC Port 1310nm

The main receiving parameters of fiber optic transceiver are sensitivity and saturated optical power: sensitivity refers to the minimum received optical power which meets the certain BER conditions; saturation refers to the maximum received optical power which meets the certain error rate condition. The range between saturation and sensitivity is called receiving dynamic range, if the sensitivity is -28dBm, the saturation is -8dBm, then the dynamic range is 20dB; when we talk about the sensitivity, a certain error rate condition must be designated, 10-12 or 10-10, generally both of them have about 0.4dB difference;

In addition to the error rate, code pattern is also another condition which has to be indicated when we talk sensitivity, we use the PRBS (Pseudo Random Binary Sequence) code, the sequence length is 2n-1, means the bit will be repeated every 2N-1 length, in the bit length of 2n-1, '0' and '1' are randomly distributed (similar to noise), the number of 0 and 1 is equal. The EPON use 27-1 PRBS code, its spectral characteristics closes to systemic 4B5B code and GPON uses 223-1 PRBS code;

There are several factors affecting sensitivity: The value of optical power (and extinction ratio); Signal to noise ratio (SNR); Speed rate (data bit rate) ;Shake; Code pattern of signal; Operating wavelength; Intersymbol interference; Component performance or failure in optical transceiver.

Product Specification Of 1x9 Fiber Optic Transceiver

Note: Generally, FA-TC901S35-20 and FA-TC901S53-20 should be used in pair.

Main Features Of 1x9 Optical Fiber Transceiver

1, Single mode fiber, Bi-Di SC interface;

2, Industry standard 1x9 footprint;

3, With 1310/1550nm transmitter and 1550/1310nm receiver;

4, Supply voltage +3.3V compatible;

5, PECL/LVPECL logic interface;

6, Transmitting distance up to 20km;

7, RoHS compliant and Pb free;

8, Operating temperature range 0℃~70℃.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.