Recycled Die Face Cutting Granule Single Screw Extruder
QUICK DETAIL :
1.Big size screw diameter
2.High production capacity
3.Low noise
4.Simple Structure
Description:
This machine is used to pelleting the leftover material of
PP,PE,PS,PC,PVC,etc.
The whole line can be controlled automatically ,the parameters can
be set on the touch screen.
Feeding Machine
This machine can be used with all kinds of extruders. It can carry plastic are cleaned into the hopper of Extrude automatically.
It can save your labour,ande realize the effect of safety and
reliability.
Extruder
This machine is used to extrude plastic cleaned by high
temperature.
The extrusion line can be consisted by such accessory machine:
main motor, the gear box, the distribution box, the barrel and
screw, the dies, vacuum calibration tank.
The distribution box enlarges the strength of the power and
realizes uniformity.
Double screws can make low viscosity index consume of raw material
and improve production.
It also has a Cooling tank making the heat of screw be appropriate.
Mould
The machine use plug board to change nets and keep machine working.
The mould is made by 40Cr nitridation .The pressure sensor prompts
to change the nets.
There are a hydraulic equipment to change the nets quickly.
Water Channel
The water channel is material cooling
Winds drying machine
Through the double channels strong wind dryer,force drying and
cooling article material reach the fast speed effect of shaping up.
Pelletizer machine
It adopts grain design to cut the material ,which made the cutting
much safe and accuracy .
Features
1.mainly used to recycle some hard pp pe scraps,like pp pe bottle
flakes etc,
2.good plasticizing effection.
3.The granules will be used for extruding or injection or blowing
again etc.
Applications:
1.Adopt Dual-step composite recycle granulate machine ,suit for
recycle waste plastic with high water content.
2.Mainframe material barrel screw have air exhaust and water
drainage structure,Can directly produce particle after material
washed and smashed.
3.Material through secondary flitter by Dual-step composite
structure ,have good air exhaust effect ,make particle good effect
of dense,color,brightness,plastify.
4.According different machine configuration ,Have produce capacity
of:50-500Kg/H.
Specifications:
Model | Screw diameter
(mm) | L/D | Screw rotation speed (r/min) | Max. extruding
Capacity
(kg/h) | Motor power
(kw) | Heating zone |
SJ-45 | 45 | 33:1 | 73 | 60 | 28/35 | 3 |
SJ-50 | 50 | 33:1 | 90 | 120 | 37/45 | 3 |
SJ-65 | 65 | 33:1 | 90 | 220 | 55/75 | 4 |
SJ-75 | 75 | 33:1 | 90 | 350 | 90/110 | 4 |
SJ-90 | 90 | 33:1 | 90 | 500 | 160/185 | 5 |
SJ-120 | 120 | 33:1 | 80 | 750 | 280/315 | 5 |
SJ-150 | 150 | 33:1 | 80 | 1000 | 355/385 | 5 |
Competitive Advantage:
1.high capacity
2.smart control
3. long serve
4.CE/ISO/SGS
