Three-Axis Vibration Test Table For Sine Sweep And Program Tests
ISO 2247
Product information:
The Vibration Test Table is an economical yet high-performance sine
vibration testing device.
It supports various vibration modes including fixed frequency,
linear sweep, logarithmic sweep, octave sweep, and program mode.
This system simulates the vibration conditions that electrical and
electronic products may encounter during transportation (by ship,
aircraft, vehicle, or spacecraft), storage, and operation, in order
to evaluate their adaptability and reliability.
It is widely used in industries such as automotive components,
instruments and meters, toys, and others, to simulate collisions
and vibrations that occur during transportation and operation, and
to assess the actual working conditions and structural strength of
products.
Reference Standards:
ISO 2247, ISO 13355, IEC 60068, ASTM D999, ASTM D4728, ASTM D3580,
GB/T 4857, GB/T 2423, etc.
Product Features:
1. Three-axis vibration (X, Y, Z) realized on the same platform;
program-controlled, precise frequency, long-term operation without
drift.
2. Continuously adjustable amplitude; supports sweep and fixed
frequency functions, suitable for various testing requirements.
3. Built-in amplitude prediction program; four-point synchronous
excitation ensures uniform vibration of the table surface.
4. Anti-interference circuitry minimizes electromagnetic
interference to the control circuit; the table surface is
non-magnetic and anti-static.
5. Made of composite industrial materials with precision machining;
elegant design and user-friendly operation. Equipped with a
dedicated measurement and control module for enhanced operational
stability.
Software Functions:
The UTM-Z023 software system is independently developed by
CIMS+FCS, with full intellectual property rights. Free lifetime
software updates are provided.
2. Real-time communication between the system software and the
vibration platform ensures accurate testing parameters.
3. User-friendly and intuitive interface; multiple testing modes
can be accessed directly with one-touch control.
4. Test data can be stored, exported, or edited via computer
connection through a data cable.
5. The control system adopts a 7-inch high-sensitivity color touch
screen, allowing intuitive parameter setting, real-time display of
test program, vibration frequency, and graphical frequency curves.
6. Equipped with an external vibration acceleration sensor for
real-time feedback during testing.
Technical Parameters:
Model | SNUTM-Z023 |
Frequency Range (Hz) | 1 – 600 |
Load Capacity (kg) | 100 |
Vibration Direction | Three axes (X + Y + Z) |
Table Size (mm) | W1000 × D1000 |
Worktable Dimensions (mm) | W1000 × D1000 × H680 |
Control Cabinet Dimensions (mm) | W450 × D400 × H1080 |
Frequency Accuracy | 0.1 Hz |
Max Acceleration | 20 g |
Control Mode | 7-inch industrial touch screen |
Amplitude (mm) | 0 – 5 |
Excitation Method | Electromagnetic |
Amplitude Adjustment | Electronic |
Waveform | Sine wave |
Timer Range | 0–9999 H/M/S (freely set) |
Cycle Count | 0–9999 (freely set) |
Safety Protection | Over-temperature, phase loss, short circuit, overcurrent, overload |
Cooling Method | Air cooling |
Testing Modes | Fixed Frequency Test | Performs sine vibration at a selected frequency (resonant,
specific, or critical frequency) for a set duration. |
Sweep Frequency Test | Scans the frequency range from low to high and back, at a defined
rate, for a specified total time or number of cycles. |
Multiplying Frequency Test | Frequency changes exponentially over time, with one octave per
minute sweep rate.
The sweep time between low and high frequencies is calculated by
the formula:
6.644 × log₁₀ (high frequency / low frequency). |
Logarithmic Sweep Test | Frequency sweep speed varies logarithmically—slower at low
frequencies and faster at high frequencies, completing a doubled
sweep rate per minute. |
Random Vibration Test | Non-deterministic vibration mode used to simulate real random
environmental vibrations. |
Program Test | Allows custom configuration of multiple test stages with different
frequencies and durations, either single or multi-group programs. |
Power Supply (V/Hz) | 220 / 50 ±5% |
Power Consumption (kVA) | 2.2 |
Net Weight (kg) | 545 |
